Garmin GPSMAP 6000 Series Installation Instructions Manual

Other manuals for GPSMAP 6000 Series: Supplement Manual, Owner's Manual, Quick Reference Manual
Manual is about: Weather and XM Satellite Radio GPSMAP 4000 Series; GPSMAP 5000 Series; GPSMAP 6000 Series; GPSMAP 7000 Series

Summary of GPSMAP 6000 Series

  • Page 1

    Gpsmap ® 6000/7000 series installation instructions warning see the important safety and product information guide in the product box for product warnings and other important information. Caution always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding. Notice w...

  • Page 2

    2 gpsmap 6000/7000 series installation instructions mounting the gpsmap 6000/7000 series chartplotter you can mount the gpsmap 6000/7000 series chartplotters using one of two methods. You can use the included bracket to bail mount the chartplotter, or you can use the included template and hardware t...

  • Page 3

    Gpsmap 6000/7000 series installation instructions 3 flush mounting the gpsmap 6000/7000 series chartplotter hardware (included): • flush-mounttemplate • rubbergasket • fourflush-mountnut-plates • four60mmm3× 0.5screws(tosecurethenutplatetothe mountingsurface) • fourm4× 0.7screws(tosecurethechartplot...

  • Page 4

    4 gpsmap 6000/7000 series installation instructions flush-mounting a gpsmap 6000 or 7000 series chartplotter mounting surface nut plate (×4) 60 mm m3×0.5 screw (×4) 70 mm m4×0.7 screw (×4) rubber gasket (4 pieces) 13.Repeatsteps11–12foreachnutplateontheremainingthreecornersofthemountingsurface. 14.I...

  • Page 5

    Gpsmap 6000/7000 series installation instructions 5 surface-mounting the gps 17x antenna 1. Usethesurface-mountbracketasyourmountingtemplate,usingthefollowingsteps:. • useacenterpunchtomarkthethreescrewlocationsonthesurface. • useapenciltotracethecable-holeinthecenterofthebracket. • setthesurface-mo...

  • Page 6

    6 gpsmap 6000/7000 series installation instructions under-deck-mounting the gps 17x antenna the gps 17x antenna can be mounted under a fiberglass surface with the adhesive pads attached to the under-deck mounting bracket. The gps 17x will not acquire satellite signals through metal—you can only use ...

  • Page 7

    Gpsmap 6000/7000 series installation instructions 7 installing a locking ring on a cable: 1. Routethecableawayfromsourcesofelectronicinterferencesothatthecableconnectorisatthemountinglocationofthechartplotter. 2. Usethetableabovetoidentifythecorrectlockingringforthecable,andlocatethelockingringbagby...

  • Page 8

    8 gpsmap 6000/7000 series installation instructions installing the gpsmap 6000/7000 series chartplotter and the gps 17x antenna nmea 2000 network connections the gpsmap 6000/7000 series chartplotter is packaged with the necessary nmea 2000 connectors and cable to either connect a gpsmap 6000/7000 se...

  • Page 9

    Gpsmap 6000/7000 series installation instructions 9 creating a basic nmea 2000 network if your boat does not already have an existing nmea 2000 network installed, you must create a basic nmea 2000 network. To create a basic nmea 2000 network: 1. Connectthethreeincludedt-connectorstogether,sideby sid...

  • Page 10

    10 gpsmap 6000/7000 series installation instructions the garmin marine network cable: • the garmin marine network cable (not included) has a locking ring that secures the cable to the chartplotter or marine network device. Because of the size of this locking ring, it is not connected to the network ...

  • Page 11

    Gpsmap 6000/7000 series installation instructions 11 connecting a gpsmap 6000/7000 series chartplotter to an existing garmin marine network xx xxxxxxxxxxxxxxxxxxxxxxxxx garmin gpsmap 6000/7000 series chartplotter gsd 22 sounder unit to transducer garmin marine radar garmin gpsmap 3000 series chartpl...

  • Page 12

    12 gpsmap 6000/7000 series installation instructions wiring additional nmea 0183 devices the nmea 0183 data cable included with the gpsmap 6000/7000 series chartplotter supports the nmea 0183 standard, which is used to wire various nmea 0183-compliant devices, such as vhf radios, nmea instruments, a...

  • Page 13

    Gpsmap 6000/7000 series installation instructions 13 advanced nmea 0183 wiring the gpsmap 6000/7000 series chartplotter has four ports to receive nmea 0183 data (rx ports), and two ports to send nmea 0183 data (tx ports). Wire one nmea 0183 device per rx port to send data to a 6000/7000 series chart...

  • Page 14

    14 gpsmap 6000/7000 series installation instructions wiring to a standard nmea 0183-compliant device with 2-way communication + - > > > > > > > > garmin gpsmap 6000/7000 series chartplotter nmea 0183-compliant device battery 10–35 vdc wire see table for wire colors wire red (power) black (pwr gnd) r...

  • Page 15

    Gpsmap 6000/7000 series installation instructions 15 wiring to a lamp or to a horn (optional) the gpsmap 6000/7000 series chartplotter can be used with a lamp, a horn, or both, to sound or flash an alert when the chartplotter displays a message. The alarm does not need to be wired for the gpsmap 600...

  • Page 16

    16 gpsmap 6000/7000 series installation instructions installing video cables the gpsmap 6000/7000 series chartplotters allow video input and monitor output using the included marine video 17-pin cable. The gpsmap 7015/7215 chartplotters have a second marine video 17-pin cable to allow for additional...

  • Page 17

    Gpsmap 6000/7000 series installation instructions 17 making the final connections to the gpsmap 6000/7000 series chartplotter after the power cable and the gps antenna (as well as any optional garmin marine network devices, nmea 0183 devices, nmea 2000 connections, or video connections) are wired to...

  • Page 18: Appendix

    18 gpsmap 6000/7000 series installation instructions appendix specifications physical specifications specification devices measurement size gpsmap6008,6208 w×h×d:11 1 / 2 ×7 3 / 8 ×5 7 / 8 in.(291.5×187.8×148.5mm) gpsmap6012,6212 w×h×d:15 1 / 32 ×9 57 / 64 ×5 27 / 32 in.(381.7×251.2×148.7mm) gpsmap7...

  • Page 19

    Gpsmap 6000/7000 series installation instructions 19 receive transmit 127250 vesselheading 127258 magneticvariance 127489 engineparameters-dynamic 128259 speed-waterreferenced 127488 engineparameters-rapidupdate 128267 waterdepth 127493 transmissionparameters,dynamic 129025 position-rapidupdate 1275...

  • Page 20

    © 2010 garmin ltd. Or its subsidiaries all rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of garmin. Garmin hereby...