Garmin GSD 22 Installation Instructions Manual

Summary of GSD 22

  • Page 1

    Gsd 22 sounder installation instructions august 2009 part number 190-00579-00 rev. D printed in taiwan.

  • Page 2

    All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of garmin. Garmin hereby grants permission to download a single...

  • Page 3: Introduction

    Gsd 22 installation instructions introduction the gsd 22 is a garmin marine network compatible, remote sounder module designed to include powerful features found in other garmin sounders, including color depth control gain (dcg ® ), dynacolortm, and auto-gain technology. When used with garmin marine...

  • Page 4: Installation Instructions

    Gsd 22 installation instructions 2 installation instructions the gsd 22 must be properly installed according to the following marine network installation instructions to get the best possible performance. If you experience difficulty with the installation, seek the assistance of a professional insta...

  • Page 5

    Gsd 22 installation instructions marine network wiring and cables garmin marine network components use specialized garmin network cables. For some installations, it may be necessary to drill 1¼ in. (32 mm) holes to route the connector end of the cables. Garmin rubber grommets are provided to cover t...

  • Page 6

    Gsd 22 installation instructions the following diagrams show the garmin marine network with a gsd 22 connected. Xx xx xx xx xx xxxxxxxxxxx the garmin marine network with a single chartplotter and a gsd 22 gsd 22 sounder to transducer xx xx xx xx xx xxxxxxxxxxx serial cable ethernet cable transducer ...

  • Page 7

    Gsd 22 installation instructions blink codes when the gsd 22 is installed, it switches on when the chartplotter is powered on. The two-color (green and red) led on the gsd 22 indicates the current operational status of the device. Code status green blinking, on for 1 second, off for 0.5 second (slow...

  • Page 8

    For the latest free software updates (excluding map data) throughout the life of your garmin products, visit the garmin web site at www.Garmin.Com. © 2009 garmin ltd. Or its subsidiaries garmin international, inc. 1200 east 151 st street, olathe, kansas 66062, usa garmin (europe) ltd. Liberty house,...