Garmin GTX 3X5 Series Installation Manual - page 64
Other manuals for GTX 3X5 Series:
Pilot's Manual
of
174
190-01499-02
GTX 3X5 Transponder TSO Installation Manual
Rev. 4
Page 4-10
4.6 Coax Cable Installation
NOTE
Make sure the length is set for the necessary cable loss. Some antennas have minimum
cable loss specifications, that may need a cable longer than the physical run in the
aircraft.
Follow the steps below for installation of the coaxial cables.
1. Route the coaxial cable to the radio rack location keeping in mind the recommendations of
2. Attach the cable in accordance with AC 43.13-1B chapter 11, section 11.
3. Trim the coaxial cable to the applicable length.
4. Install the coaxial connectors per the manufacturer’s instructions.