Garmin Mobile 10 Quick Start Manual - Step 1: Install The Battery
Garmin Mobile
®
10 Quick Start Manual
Step 1: Install the Battery
WarninG: This product contains a lithium-ion battery. See
for important battery safety information.
1. Locatetheblackorgraylithium-ionbatterythat
cameintheproductbox.
2. Withyourthumbnail,slidethebatterycoverrelease
tabtowardtheendoftheGPS10x.
3. Liftthebatterycoveroff.
4. Locatethemetalcontactsontheendofthelithium-
ionbattery.Insertthebatterysothemetalcontacts
onthebatterymatchupwiththemetalcontacts
insidethebatterycompartment.Pressthebattery
downintoplace.
5. Replacethebatterycoverbyinsertingthetabsinto
thenotches.Pressthebatterycoverclosed;the
releasetablocksthecoverinplace.
Replacement Battery
If you need to replace the battery, use a Garmin 3.7 Volt
lithium-ion battery pack (010-10840-00). Purchase a
. You
can also use a compatible mobile-phone battery, such as
a Nokia BL-5C.
Step 2: Charge the GPS 10x
Receiver
1. Plugthesmallendofthepowercableintothemini-
USBconnectorontheendoftheGPS10x.
2. Plugtheotherendofthepowercableintoan
availablepoweroutletinyourvehicle.
You can use the GPS 10x receiver while you are
charging it. It takes about four hours to charge the
battery. A fully charged battery lasts about 22 hours.
Release
tab
Battery
cover
Lithium-ion
battery