Garmin Nuvi 765 - Widescreen Bluetooth Portable GPS Navigator Quick Start Manual - Step 1: Mount The Nüvi
Step 1: Mount the nüvi
1. Flip the cradle open,
toward the windshield.
2. Fit the bottom of your
nüvi into the cradle.
3. Tilt the nüvi back until
it snaps into place.
Your unit should turn on automatically if it
is in place and your vehicle is running.
To remove the unit from the cradle, pull up
the release button on the back of the cradle
and tilt the unit towards you and remove it.
Step 2: Configure the nüvi
To turn on your nüvi, slide the
Power
key to the left. Follow the on-screen
instructions.
Step 3: Acquire Satellites
1. Go outdoors to an open area, out of
garages, and away from tall buildings.
2. Stop your vehicle, and turn on the nüvi.
Acquiring satellite signals may take a few
minutes. The
bars indicate GPS
satellite strength. When one bar is green, the
nüvi has acquired satellite signals. Now you
can select a destination and navigate to it.
Step 4: Use the nüvi
➊
➋
➌
➍
➏
➒
➑
➐
➎
➊
GPS satellite strength.
➋
Bluetooth
®
technology status.
➌
Battery status.
➍
Current time.
➎
Touchtofindadestination.
➏
Touch to view the map.
➐
Touch to make a call when connected to
a compatible mobile phone.
➑
Touch to adjust the volume.
➒
Touch to use the tools such as media
players, settings, and Help.