Thank you for purchasing another quality product from tr-1 autopilots. Tr-1 is confident that you will find this piece of electronic equipment will enhance your autopilot’s ability to make your boating experience safer and more enjoyable. Thank you “the integrator” ad10 gateway provides the ability ...
Page 3 mounting considerations installation the integrator unit is mounted on any fl at surface, using two #6 screws provided, through the mounting holes in the case. The unit should be located so its led is visible to the helmsman during normal boat operation, but not directly in the line of vision...
Nmea configuration the tr-1 gladiator’s nmea output should be set to send at its highest rate (10 hz). The gladiator’s default setting is 10hz. If you have changed this setting or do not know what setting it is on, follow these instruc- tions. Press and release the [setup] button on the handheld, se...
