Golden Motor E-bike Shrinker User Manual - page 11
7
E-bike Shrinker User’s Guide
cause the front wheel can not be smoothly round.
5.6
Adjustment of Chain
See in reference illustration E:
The chain maybe become loose after long-time riding, when you found this problem,
you can unscrew the nut of rear hub axle; adjust the chain adjustor to tighten the
chain. Pull the chain down 10-15mm to its best tension.
Hold the pedal and rotate on anti-clockwise, the chain should be in normal state:
rotation well, without abnormality, without noise.
5.7
Assembly of the Pedal
The screw thread direction of the Right Pedal is right-hand thread; its lock direction is
shown as photo F.
The screw thread direction of left Pedal is left-hand thread; its lock direction is shown
as photo G.
▲
Please carefully read the manual before riding your E-bike Shrinker; please do not
lend out your Shrinker to the persons who does not know the details.
* Note
:
1)Your Shrinker has been equipped with brake switch-off device, left and
right brake levers are installed with brake power switch. No matter you
brake left or right one during your riding, the power will be cut off
in order to make your riding safety.
2)When the battery output voltage is reached the bottom index, Shrinker
electronic control system will cut off the power automatically for
protect the battery cycle lifetime. When the battery reaches its bottom
voltage, you can just riding your bike by the pedal. And the battery should
be recharge full for the next cycling work.
3) Please let your Shrinker powers switch off during your parking.
4) Let your Shrinker parking stable and locked the kickstand as well.