Goldline AQL2-SS-RF Installation And Operation Manual

Summary of AQL2-SS-RF

  • Page 1

    Aqua logic aqua logic aqua logic aqua logic aqua logic and spaside remote control installation and operation manual for model aql2-ss-rf ® fcc statement this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful int...

  • Page 2

    Compatibility this product is compatible with all pro logic controls and aqua logic controls oper- ating with software revision r1.10 or higher and using an aql2-base-rf base sta- tion operating with software revision r3.00 or higher. Note that this product will not communicate with a aql-base-rf ba...

  • Page 3

    Operation the spaside remote communicates with the base station on the pro logic/aqua logic control unit using rf (radio frequency) technology. When you push a button on the spaside remote, it sends a command and flashes the led indicator once. After a brief delay, the spaside remote receives a conf...

  • Page 4

    Heater on/off provided that the filter pump is running, normal pro logic/aqua logic operation will turn the heater (heater1 output) on until the desired temperature (see settings menu) is attained. The heater will then turn on periodically, as required, to maintain that temperature. When the "on" bu...

  • Page 5

    Heater on/off provided that the filter pump is running, normal pro logic/aqua logic operation will turn the heater (heater1 output) on until the desired temperature (see settings menu) is attained. The heater will then turn on periodically, as required, to maintain that temperature. When the "on" bu...

  • Page 6

    Operation the spaside remote communicates with the base station on the pro logic/aqua logic control unit using rf (radio frequency) technology. When you push a button on the spaside remote, it sends a command and flashes the led indicator once. After a brief delay, the spaside remote receives a conf...

  • Page 7

    Compatibility this product is compatible with all pro logic controls and aqua logic controls oper- ating with software revision r1.10 or higher and using an aql2-base-rf base sta- tion operating with software revision r3.00 or higher. Note that this product will not communicate with a aql-base-rf ba...

  • Page 8

    Aqua logic aqua logic aqua logic aqua logic aqua logic and spaside remote control installation and operation manual for model aql2-ss-rf ® fcc statement this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful int...