Goldmund METIS ONE User Manual - page 6
GOLDMUND METIS D/A – USB D/A Converter - 6
2
SETTING UP THE METIS D/A
2.1
CHOICE OF D/A CONVERTER LOCATION & COOLING
If you want to achieve the best possible sonic result, select a position on a shelf or on a
piece of furniture where the converter is isolated from vibrations of mechanical
components.
2.2
POWER SUPPLY
The Goldmund Metis D/A converter uses an internal power supply developed by Goldmund
to provide totally separate voltage between the USB part and the digital/analog circuitry.
Your power supply unit has been set to operate with the mains voltage of your area. Check
on the power supply voltage switch if there is any doubt. If you move after purchasing the
D/A converter to an area using a different AC mains voltage, you can change the voltage
yourself or consult your local Goldmund dealer for assistance in doing so.
The voltage selector on the rear panel allows choosing between 220V (234V nominal) and
110V (117V nominal).
Please refer to the Technical Specifications at the end of this manual for the main line
voltage range.
In case the nominal line voltage in your country is out of range, please consult your local
Goldmund dealer for assistance.
The power supply unit can operate indifferently with both 50 and 60 Hz AC line.