Goldmund MIMESIS 29.4M MILLENNIUM EDITION User Manual - Goldmund Mimesis 29.4

Summary of MIMESIS 29.4M MILLENNIUM EDITION

  • Page 1

    Goldmund mimesis 29.4m millennium edition power amplifier.

  • Page 2: Goldmund Mimesis 29.4

    Goldmund mimesis 29.4 millennium edition power amplifier user manual congratulations thank you for purchasing the goldmund mimesis 29.4m. You have acquired the best analogue power amplifier ever made for professional and domestic uses. Please take some time to read this manual. It may provide you wi...

  • Page 3

    3 1 - unpacking you will find in the goldmund mimesis 29.4m box : - the amplifier - the power cord - this manual - spare fuses. Please keep the packaging in case you need to transport the amplifier at a later date or if you have to send it for maintenance. 2 – choice of amplifier location and coolin...

  • Page 4

    4 3 – line voltage adjustment a voltage selection is provided inside the amplifier. If your line voltage is not adapted to the voltage indicated on the serial plate of the amplifier, please consult your local goldmund dealer for internal adjustment. Attention : on the 220v position, the goldmund mim...

  • Page 5

    5 5 – amplifier controls normal operation on the front plate of the goldmund mimesis 29.4m amplifier you will find only two power keys. In the standard mode, the two power keys have to be activated simultaneously to power the amp on. This security feature is provided to avoid any fortuitous power on...

  • Page 6

    6 when only one amp is used, leave the ranking to 1. If you use several amplifiers, rank them from 1 to their number. When they will be powered on in auto-power mode by receiving a signal, they will start in the order of the rank they have, each after the previous one (few 100 millisec later), avoid...

  • Page 7

    7 we recommend that you proceed carefully to try this. You must do it in combination with the speaker polarity and/or with absolute phase switching to be sure of the result. - the goldmund exclusive "mechanical grounding". In the goldmund mimesis 29.4 amplifier, goldmund has, more than in any other ...

  • Page 8

    8 • never plug an input cable on a power amp when it is turned on. • be careful to use only very high quality interconnects. If the ground connection become loose, there is a big danger of oscillation. Warranty is voided if this occurs. • never run the input and output (speaker) cables parallel. If ...

  • Page 9

    9 technical data : power - nominal power : 350 w rms (2 - 8 ohms). 175 w rms (1 - 16 ohms). - maximum instantaneous power : 500 w rms (8 ohms). - maximum voltage swing : 84 v peak. - maximum current swing : 28 a peak. Frequency response these figures are valid for the circuit alone, at any level bet...

  • Page 10

    10 power supply - nominal line voltage : 117, 234 v (switchable). - input voltage range : +/- 10 %. - maximum power consumption : 2000 w. - power used in standby : 120 w. - 8 toroidal transformers, 4 separated power supply. Grounding - separated ground and earth. - floating chassis connected to main...