Goldmund MIMESIS 32 User Manual - page 9
GOLDMUND MIMESIS 32 - UNIVERSAL PREAMPLIFIER - 8
1
SETTING UP THE MIMESIS 32 (Ctd.)
1.5
FIRST INSTALLATION & CONNECTIONS (Ctd.)
On Digital outputs, the signals are depending on the configuration loaded in the
Preamplifier.
The Input 6 (USB) is used to link the Mimesis 32 to an external computer in order to play
music (PCM 48kHz maximum). The Input Control (USB) is used to update the Mimesis 32
software with the Goldmund Universal Configurator. All drivers needed are included in the
configuration file provided in the Configurator.
Note: If the display indicates “CONFIG NOT SET”, it means that the Mimesis 32 does not
have a configuration loaded. Please contact your authorized Goldmund retailer to assist you
to set up your unit.
To play audio files from a computer to a Mimesis 32:
1- Connect the USB cable from the computer to the Mimesis 32 and power them both ON.
2- Select the audio input 6 on the Mimesis 32 to listen to USB audio.
When all input sources are connected, connect the digital output RCA jacks to the Digital
input of the active speakers or the digital input of your amplifier