User manual goldmund mythos 2 analog acoustic processor.
Thank you for purchasing the goldmund mythos 2, analog acoustic processor. Please take some time to read this manual. It will provide you with useful information to make your pleasure of listening to the mythos 2 even higher. Introduction goldmund mythos 2 analog acoustic processor goldmund was foun...
Goldmund mythos 2 – analog acoustic processor - 3 table of contents 1 setting up the mythos 2 5 2 first installation & connections 8 3 cleaning 9 4 technical specifications 10
Goldmund mythos 2 – analog acoustic processor - 4 w a r n i n g ! No connection or manipulation may be done before reading these instructions. Damage to the analog processor may result if the following instructions are not understood and applied. This high quality processor possesses new technical f...
Goldmund mythos 2 – analog acoustic processor - 5 1 setting up the mythos 2 1.1 unpacking you will find in the goldmund mythos 2 box: - the processor - the power cord - this manual attention please keep the packaging in case you need to transport the mythos 2 at a later date or if you have to send i...
Goldmund mythos 2 – analog acoustic processor - 6 1 setting up the mythos 2 (ctd.) 1.2 choice of analog acoustic processor location & cooling select a very rigid support for your processor. Position the processor as far away as possible from the speakers if you want to totally avoid the vibrations t...
Goldmund mythos 2 – analog acoustic processor - 7 1 setting up the mythos 2 (ctd.) 1.3 power supply (ctd.) the voltage selector on the rear panel allows voltage selection between 230v and 115v. The power supply unit can operate indifferently with both 50 and 60 hz ac line. Note some components withi...
Goldmund mythos 2 – analog acoustic processor - 8 2 first installation & connections 2.1 power connection plug the ac power cord to the power supply and in a wall socket. The processor is powered by pressing the power switch located on the rear panel. For best sonic results, goldmund recommends to l...
Goldmund mythos 2 – analog acoustic processor - 9 2 first installation & connections (ctd.) 2.4 processor functions the mythos 2 can achieve several types of signal acoustic processing. It may be used as: - electronic crossover for up to four separate ways (4 pairs of power amplifiers, each receivin...
Goldmund mythos 2 – analog acoustic processor - 10 4 technical specifications digital inputs/outputs configuration • 2 analog rca analog outputs • 4 pairs of analog rca outputs d/a converter circuits • goldmund ultra-linear phase proprietary circuitry enhanced alize 6 with enhanced dynamics • bandwi...
