1 goldmund sr2.3 2 channel power amplifier.
2 goldmund sr2.3 2 channel amplifier user manual attention : no connection or manipulation must be done before reading those instructions. Damage to the amplifier may result if the following instructions are not consciously understood and applied..
3 1 - unpacking you will find in the goldmund sr2 box : - the amplifier. - the power cord. - this manual and the warranty card. - accessories and spare fuses. Please keep the packaging in case you need to transport the amplifier at a later date or if you have to send it for maintenance. 2 - choice o...
4 4 - connections check if volume control is down to zero on the preamplifier or the 5 channel processor. First, connect the interconnects between the preamp/processor and each of the power amps inputs. Connect the speaker cables to the red and black terminals accessible at the back of the amplifier...
5 6 - sound quality optimization - warm-up sonic effect. If the power amplifier has not been powered on for a few days, the optimum sound quality is reached after 15 minutes. This delay has been optimized to be minimal and the sonic quality when just powered on is much higher than other quality powe...
6 7 - safety and precautions attention : the goldmund sr2 is an extremely high speed amplifier. Any bad ground connection can generate high frequency oscillation which is dangerous for tweeters. It is also generally dangerous to run input cable and speaker cables in parallel for a long distance. If ...
7 technical data power - nominal power before clipping: 2x200 w rms (2 - 8 ohms). 150 w rms (1 - 16 ohms). - maximum power : > 400 w rms (3 ohms). - maximum voltage : 55 v peak. - maximum current : > 15 a peak. These values for all channel driven frequency response these figures are valid for the ci...
