Goldmund SRI2 User Manual

Summary of SRI2

  • Page 1

    1 goldmund sri2 integrated amplifier user manual.

  • Page 2

    2 goldmund sri2 integrated amplifier user manual attention : no connection or manipulation must be done before reading these instructions. Damage to the amplifier may result if the following instructions are not consciously understood and applied..

  • Page 3

    3 1 - unpacking you will find in the goldmund sri2 box : - the amplifier. - the remote controller - the power cord. - this manual. Please keep the packaging in case you need to transport the amplifier at a later date or if you have to send it for maintenance. 2 - choice of amplifier location and coo...

  • Page 4

    4 4 - connections connect the power cord to the back of the unit and plug it into the nearest wall plug. Use a 3 lugs grounded plug for safety. To get the best sound of the amplifier, avoid any multiple plug or extension cord. Connect the interconnects between the sources and the amplifier. Plug the...

  • Page 5

    5 - tape monitor this switch, when pushed down, allows the monitoring of the tape machine connected to the tape input and tape output back panel connector. - selector this selector allows to choose the source from one of the 5 inputs. - remote-control the srp2 uses a volume motor-driven potentiomete...

  • Page 6

    6 6 - sound quality optimization - warm-up sonic effect. If the amplifier has been left unpowered for a few days, the optimum sound quality is only reached after few minutes. The critical circuits have to warm up to around +55 degrees celsius (+131 degrees fahrenheit) before achieving their optimal ...

  • Page 7

    7 7 - maintenance the goldmund sri2 amplifier usually requires no maintenance. For the audio purists who want to keep their amplifier sounding as new, we only recommend that after a year or two, you have a technician or an official goldmund representative readjust the dc offset. This very simple ope...

  • Page 8

    8 noise - signal-to noise ratio on line input : > 85 db (0.01 hz - 10 mhz). - weighted asa a : > 90 db. Operating temperature - room temperature : -30 to +40 degrees celsius ( -22 to +104 degrees fahrenheit). - internal temperature : +45 to +65 degrees celsius ( +113 to +149 degrees fahrenheit). Pow...