Goldmund TELOS 250+ User Manual - page 11
GOLDMUND TELOS 250 - Universal Power Amplifier - 11
5
AMPLIFIER CONTROLS (Ctd.)
AUTO-POWER OPERATION
In AUTO-POWER mode, the amplifier is turned on automatically when receiving an audio
signal.
This mode is useful when several amplifiers are used together in a multi-amp system or
when the power amplifiers are not easily accessible.
OTHER DISPLAY
If an abnormal situation is found by the TELOS 250, one of the front panel red lights may
turn ON, and the power of the amplifier is instantaneously set OFF.
The left red Led indicates an over temperature situation.
The display indicates if the problem is an over-temperature situation, an HF oscillation or
DC signal has been detected or an overload (for example when output is short-circuited).
Before re-starting the amplifier, detect what caused the problem and remove the cause
first.
The amplifier will remain OFF with a red led on until the user intervenes.
To unlock the amplifier from the error mode, press the power key for >2 seconds, or restart
the power sequence.