User manu al code 50122168 t g en dq-cam- b2 rev.0 1 2 7 dq-cam-gb2 camera interface nexa modular gb2 2-wire model: dq-cam-gb2 power in-use cam (1~4) cam3 cam4 cam1 cam2 technology.
Introduction first and foremost we would like to thank you for purchasing this product. Our commitment to achieving the satisfaction of customers like you is manifested through our iso-9001 certification and the manufacture of products like the one you have just purchased. Its advanced technology an...
3 description of the dq-cam-gb2 camera interface description: model: dq-cam-gb2 power in-use cam (1~4) cam1 cam2 cam3 cam4 bus(out) front top bottom a. B. C. D. Status leds. Buttons: control of cam1-cam4 video output. Dip switch. Connect to analogue cctv cameras (1~4). Reserved . Din rail latch rele...
4 installation the dip switch is located at the top of the module. Description of the dip switch: 1 2 3 on dip 4 5 6 leave dip 1 and 2 in the off position. 1 2 3 on dip 4 5 6 leave dip 3 in the off position if cameras 3 and 4 have not been installed. 1 2 3 on dip 4 5 6 1 2 3 on dip 4 5 6 1 2 3 on di...
5 installation description of the status leds: power: led on: indicates that the device is operating normally. In -use: led on: indicates that the dq-cam-gb2 unit is broadcasting video. Cam(1~4): indicates the camera that is broadcasting video. The cam (1~4) leds blink when the monitor shows the ima...
Access panel mains 100~240vac n l cn bus (m) bus(pl) fa- 2 gb /a l or out in dq-cam-gb2 bus bus bus bus d2 d1 d2l- gb2 end of line on bus bus bus bus d2 d1 d2l- 2 gb apartment 2 apartment 1 off (1) end of line (1) vesta2 master ( ) 3 ** ( ) * ( ) vesta2 master bus bus ( ) 3 ** ( ) ( ) 3 ** ( ) ( ) 3...
Notes: 7 dq-cam-gb2 camera interface.
Golmar@golmar.Es www.Golmar.Es sistemas de comunicación s.A. Golmar se reserva el derecho a cualquier modificación sin previo aviso. Golmar se réserve le droit de toute modification sans préavis. Golmar reserves the right to make any modifications without prior notice. Golmar s.A. C/ silici, 13 0894...
