- DL manuals
- Golmar
- Intercom System
- TKIT632
- User Manual
Golmar TKIT632 User Manual
Summary of TKIT632
Page 1
User manu al code 50121904 t en kit632 thera rev.0 1 1 6 g 2 video door entry b system kit 2-wire installation stainless steel nexa modular.
Page 2
Introduction first and foremost we would like to thank you for purchasing this product. Our commitment to satisfying our customers can be seen from our iso-9001 certification and from the manufacturing of products like this one. Its advanced technology and exacting quality control will ensure that c...
Page 3
Characteristics - video door entry system with simplified installation (non-polarised 2 wire bus). - a up to 4 access panels (dp-gb2 distributor required for more than one access panel) per installation. - up to 2 apartments (nx5110 1-apartment kit and nx5220 2-apartment kit) per installation. - max...
Page 4
Description of the el632/gb2 sound module 4 microphone. Speaker. Front. Sound module push buttons (x2). Connection block (gb2 bus). Push button connector (in unused). Villas back. : release positive, negative (12vdc output for golmar dc lock ). : contact "c" for lock (relay 1). Release : contact "no...
Page 5
5 ce-610 : 125( ) x 140( ) x 56( ) mm. W h d embedding box 1650 1850 1450 make a hole in the wall to position the top of the door panel at a height of 1.65 m. Hole dimensions: the door panel has been designed to be used under most environmental conditions. It is however advisable to take extra preca...
Page 6
6 door panel installation codes assigned to the call buttons of the sound module: 1 2 3 4 5 6 on na2 + ap- c1 na1 ap+ c2 ap+ ap- p1 p2 busbus relé 2 relé 1 _ 12vdc 1 2 el632/gb2 c 16 31 odes - c 0 15 odes - p1 p2 p2 the sound module's p1 and p2 push buttons are assigned with factory codes. - apartme...
Page 7
7 door panel installation description of the configuration jumper: 1 2 3 4 5 6 on + c1 _ 1 important : do not change the factory default position of the configuration jumper. Description of the door panel led lights (for low light conditions): the door panel led lights will turn on during a call if ...
Page 8
8 door panel installation adjusting the door panel communication volume: if after starting the system the door panel audio volume seems inadequate, follow these steps: - call an apartment. - the call is received in the apartment. Establish communication by pressing the push button on the monitor. - ...
Page 9
9 door panel installation configuring the contact type for relay 1 and relay 2 (lock release): to change the contact type for lock release activation of relay 1 and relay 2 of the door panel, follow these steps: - set dip 6 of the sound module's con#guration dip switch to on (see page 6), a con#rmat...
Page 10
10 power supply installation fa-gb2/a power supply installation instructions: m 4 x 8 3,5 x 25 din-7972 din-963 replace the protective cover once the input terminals have been wired. Please note that current regulations stipulate that the power supply must be protected by a thermo- magnetic circuit ...
Page 11
Wiring diagrams: one apartment kit (nx5110 thera kit) and golmar dc lock release. 11 na2 + ap- c1 na1 ap+ c2 ap+ ap- p1 p2 busbus relay 2 relay 1 _ 12vdc lock release max. 12 vdc/270ma n l cn mains 100~240vac bus (m) bus(pl) fa- 2 gb /a on 1 2 3 4 5 6 ap sw1 ( ) 1 ( ) 1 access panel door thera bus c...
Page 12
Wiring diagrams: one apartment kit (nx5110 thera kit) with monitors in parallel (in-out) and golmar dc lock release. 12 two apartment kit (nx5 0 thera kit) with monitors in parallel (in-out) and golmar dc lock release. 22 configuring the end of line in the last monitor. . Dip 6 to on * important: fo...
Page 13
Wiring diagrams: one apartment with 16 thera monitors, 4 dp-gb2 distributors and golmar dc lock release. A 13 configuring the end of line in the last monitor. . Dip 6 to on access panel door ** lock release max. 12 vdc/270ma bus bus bus bus bus bus bus bus d c b a dp- 2 gb a bus bus end of line on e...
Page 14
Wiring diagrams: one apartment with 16 thera monitors, 8 d2l-gb2 distributors and golmar dc lock release. 14 configuring the end of line in the last monitor. . Dip 6 to on ** na2 + ap- c1 na1 ap+ c2 ap+ ap- p1 p2 busbus relay 2 relay 1 _ 12vdc lock release max. 12 vdc/270ma bus bus bus bus d2 d1 d2l...
Page 15
Wiring diagrams: two apartments with 18 thera monitors, 5 dp-gb2 distributors and golmar dc lock release. A 15 configuring the end of line in the last monitor. . Dip 6 to on ** lock release max. 12 vdc/270ma bus bus bus bus bus bus d c b a dp- 2 gb a bus end of line end of line off code 3 code 0 cod...
Page 16
Wiring diagrams: two apartments with 18 thera monitors, 9 d2l-gb2 distributors and golmar dc lock release. 16 configuring the end of line in the last monitor. . Dip 6 to on ** na2 + ap- c1 na1 ap+ c2 ap+ ap- p1 p2 busbus relay 2 relay 1 _ 12vdc lock release max. 12 vdc/270ma on 1 2 3 4 5 6 bus bus b...
Page 17
Wiring diagrams: 17 bus bus bus bus d c b a dp- 2 gb a end of line off ap ap access panel door 2 on 1 2 3 4 5 6 sw1 access panel door 1 on 1 2 3 4 5 6 sw1 ap ap access panel door 3 on 1 2 3 4 5 6 sw1 access panel door 4 on 1 2 3 4 5 6 sw1 (1) (1) (1) (1) to the distributors (building floors) lock re...
Page 18
Access panel door on 1 2 3 4 5 6 sw1 na2 + ap- c1 na1 ap+ c2 ap+ ap- p1 p2 busbus _ ap1 na2 + ap- c1 na1 ap+ c2 ap+ ap- p1 p2 busbus relay 2 relay 1 _ 12vdc connection of 2 dc lock releases without “ap”: important: . With 2 dc lock releases, it is not possible to use the “ap” door opening buttons (1...
Page 19
Not s: e 19 stainless steel nexa modular gb2 video system kit – villas.
Page 20
Golmar@golmar.Es www.Golmar.Es sistemas de comunicación s.A. Golmar se reserva el derecho a cualquier modificación sin previo aviso. Golmar se réserve le droit de toute modification sans préavis . Golmar reserves the right to make any modifications without prior notice..