Golzer BANC-70 User Manual - page 5
2. Enable searching of nearby Bluetooth devices using the Bluetooth menu on your device.
3. Once the “Golzer BANC-70” is found, you can now connect and pair. If your device prompts you for a password,
please use “0000”. For more details, please refer to your device’s user manual.
4. When pairing is successful, the Bluetooth LED indicator will flash green every 3 seconds. If pairing is
unsuccessful, please turn off the BANC-70 headphones and repeat the pairing steps.
Note:
BANC-70 can be paired with two Smartphone at the same time.
If BANC-70 was previously paired to a Smartphone, it is possible to be paired with a 2nd Smartphone: restart
BANC-70 (switch off and switch on) to enter pairing mode; repeat the above pairing procedure to pair BANC-70
with the 2nd Smartphone; and then reconnect BANC-70 with 1
st
Smartphone; finally two Smartphone can connect
with BANC-70.
After initial pairing is established, the headphones will automatically reconnect to the last paired device upon
turning ON.
May not be available for some devices. See your user manual for specific functionality/features available.
Call-related Functions:
Answer a call
Press
►ll once
End a call
during speaking, press
►ll briefly once
Ignore/reject a call
Hold
►ll for 1 second
Last number re-dialing from headphone
Press
►ll twice briefly in standby status
Swap calls between headphone and
Smartphone
While speaking, press
►ll until a “beep”
sound is heard then release the button
Music-related Functions:
Play/Pause music
Press down the
►ll Button
once to start playing
music and press it again to pause your music
Next/previous tracking
Press down the music control button towards the forward
icon
to play the next song. To play the previous
song, press and release the music control button
towards the backward icon
* May not be available for some devices. See your user manual for specific functionality/features available.
Voice Dialing from your Headphone:
If your mobile phone is equipped with a voice dialing function, press and hold the
►ll button until a “beep” sound
is heard
and say the voice tag according to the phone’s command functions. You must record the voice tag (the
person’s name) into your mobile phone prior to using the voice dialing function on the headphone. Please refer to
your mobile phone’s user guide.