Golzer BTX40 User Manual - page 2
Golzer BTX40 Instruction Manual
Getting Started BTX40
To use your BTX40 stereo Bluetooth headphones, please follow the steps below:
1) Ensure your Bluetooth headphones is fully charged.
2) Pair your charged Bluetooth headphones with a Bluetooth-enabled mobile phone prior to use on the first time. Please fully
charge your new headphones before first use.
Charging Your Headphones
Connect the USB charging cable to charging USB port (7) of the headphones. The LED indicator (1) while be red while charging;
the led indicator will turn off once the devise is fully charged.
Default Setting:
First, make sure the BTX40 headphones is turn off. Then, press the (►ll) button (3) to turn on the headphones, and then press
the button (2) “+” and button (4) “-” at the same time for 2-3 seconds until the purple LED flashes.
Turning Your Headphones On and Off
Turning on the headphones
Press and hold the (►ll) until the LED indicator flashes solid blue for 1 second and then flashes blue and red alternatively with an
ascending “beep” sound heard, the device will then be in pairing mode.
For detailed pairing instructions, please refer to "Pairing Your Headphones".
Turning Off the headphones
Press and hold the (►ll) for 4 seconds until the LED indicator flash solid red, the device will turn off with a decreasing “beep”
sound.
Attention: If you will not use the headphones for a while, you should consider turning off the Bluetooth function on your mobile
phone as well.
BTX40 Headphones Overview
LED Indicator (1)
Volume +/Previous track (2)
(►ll) Button (Power ON/OFF, Make/Answer/End/Reject/Transfer calls, Play/Pause music, Voice Dialing) (3)