GoMax Electronics CV-57VA User Manual

Manual is about: HDMI extender over single Cat.X with HDBaseT-Lite, RS-232, Bi-directional IR and PoC

Summary of CV-57VA

  • Page 1

    Hdmi extender over single cat.X with hdbaset-lite, rs-232, bi-directional ir & poc user manual rev: 150114 made in taiwan c c v v - - 5 5 7 7 v v a a.

  • Page 2: Safety And Notice

    Safety and notice the cv-57va hdmi extender over single cat.X with hdbaset-lite, rs-232, bi-directional ir & poc has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the cv-57va should be used w...

  • Page 3: Introduction

    Introduction the cv-57va hdmi extender over single cat.X with hdbaset-lite , rs-232, bi-directional ir & poc boosts up your video/audio transmission distance up to 60m (198ft) in hdtv 1080p with 48-bit color depth. Cv-57va also supports the most advanced 3d video format complaint with hdmi specifica...

  • Page 4: Specifications

    Specifications model name cv-57va technical cv-57va[tx] cv-57va[rx] role of usage transmitter [tx] receiver [rx] hdmi compliance hdmi deep color, full 3d & 4k2k@30 hdcp compliance yes video bandwidth single-link 340mhz [10.2gbps] video support 480i / 480p / 720p / 1080i / 1080p60 hdmi over utp 1080p...

  • Page 5: Package Contents

    Package contents ● 1x cv-57va [tx & rx] ● 1x ir blaster ● 1x ir receiver ● 1x dc 12v 1.5a in-line with c7 power cord ● 1x user manual connection diagram 3.

  • Page 6: Panel Descriptions

    Panel descriptions transmitting unit ► cv-57va-tx front panel 1. Led: power led, status led, link led, hdcp led (1) power led: this led light always shine is meant that works fine. (2) status led: this led light is blinking it means functions well. (3) link led: this led light always shine is meant ...

  • Page 7

    Receiving unit ► cv-57va-rx front panel 8. Led: power led, status led, link led, hdcp led (1) power led: this led light always shine is meant that works fine. (2) status led: this led light is blinking it means functions well. (3) link led: this led light always shine is meant that works fine. (4) h...

  • Page 8: Ir Pass-Through

    Ir pass-through ir extenders ir blaster ir receiver ir sockets ir blaster: plug in the ir blaster to emit all ir command signals received from the ir receiver from the other enf to control the devices corresponding to the ir signals. Ir receiver: plug in the ir receiver to receive all ir command sig...

  • Page 9: Hdmi Pin Definition

    Hdmi pin definition type a (receptacle) hdmi pin 1 tmds data2+ pin 11 tmds clock shield pin 2 tmds data2 shield pin 12 tmds clock– pin 3 tmds data2– pin 13 nc pin 4 tmds data1+ pin 14 reserved (n.C. On device) pin 5 tmds data1 shield pin 15 scl pin 6 tmds data1– pin 16 sda pin 7 tmds data0+ pin 17 d...

  • Page 10: Notice

    Notice 1. All hdmi over cat5 transmission distances are measured using belden 1583a cat5e 125mhz utp cable and astrodesign video signal generator vg-859c & vg-870b. 2. Incorrect placement of ir blaster and receiver may result in the failure of the ir extenders. Please check carefully before plugging...

  • Page 11: Warranty

    Warranty the seller warrants the cv-57va hdmi extender over single cat.X with hdbaset-lite, rs-232, bi-directional ir & poc free from defects in the material and workmanship for 1 year from the date of purchase from the seller or an authorized dealer. Should this product fail to be in good working o...