GoMax Electronics S-PG-303M User manual - Front Panel Operation
4
Front Panel Operation
Button Resolution
Normally, Button Resolution is used to select different resolution for SDI outputs, and the LEDs from PAL to
1080p will indicate the selected video resolution. When all 4 lights out, the output resolution is NTSC
When pushing Button Resolution and holding for 2 seconds, LED 3+4 will blink once to indicate the current
resolution is saved into the embedded flash!
Button Video Frame
Normally, Button Video Frame is used to select different frame rates for SDI outputs, and the LEDs from
24Hz to60Hz will indicate the selected video frame rat. When all 7 lights out, the output rate is 23.98Hz
When pushing Button Video Frame and holding for 2 seconds, LED 3+4 will blink once to indicate the
SMPTE color bar pattern is chosen and saved into the embedded flash!