Sp-9008 1x8 vga/component/s-video/composite splitter user manual made in taiwan.
1 safety and notice the sp-9008 1x8 vga/component/s-video/composite splitter has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, sw-9008 should be used with care. Please read and follow the saf...
2 the sp-9008 is designed to work as a duplicator and an amplifier at the same time for vga video applications. The sp-9008 not only takes one video input from a vga source and immediately directs it to eight vga monitors or projectors, but also boosts and extends the signal up to 65m (210ft) withou...
3 specifications & package contents model name sp-9002 sp-9004 sp-9008 technical output ports 2 4 8 supported input/output vga video bandwidth 400mhz video support wuxga [1920x1200@60] & uxga [1600x1200@60] or even higher transmission uxga – 65m [210ft] audio support no vga connector hd-15 [15-pin d...
4 1. Connect a pc source to the vga input of the sp‐9008. 2. Connect eight vga monitors or projectors to the vga outputs. 3. Plug power adapter cable into 5v dc power jack. Hardware installation application diagrams.
5 the seller warrants the sp‐9008 1x8 vga/component/s‐video/composite splitter to be free from defects in the material and workmanship for 1 year from the date of purchase from the seller or an authorized dealer. Should this product fail to be in good working order within 1 year warranty period, the...
