Good Water Warehouse PL-3000 Installation & Service Manual

Summary of PL-3000

  • Page 1

    Please read this manual carefully before installation. Please read this manual carefully before attempting installation. Model #: pl-3000, pl-4000, pl-5000 ÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊ,"Ê ˜ÃÌ>>̈œ˜ÊeÊ-iÀۈviÊՈ`i.

  • Page 2: Introduction

    Introduction read this entire service guide before beginning installation. This reverse osmosis drinking water system has been designed for quick and simple installation and maintenance . By carefully reading this instruction manual and following the operational guidelines you will insure a successf...

  • Page 3: Starting Your Installation

    Starting your installation preparation check the following list of components to ensure that all parts are packed with your system. 1 - storage tank 1 - ro system 1 - faucet 1 - installation kit determine the location for the installation of the ro system. Avoid locations where the system might come...

  • Page 4

    Installation - product water faucet drilling the faucet hole the product water faucet may be installed on any flat surface at least 2” in diameter. Check the underside of the location for interference. Porcelain/enamel sinks a 3/8” variable speed drill drill is recommended for this procedure. A sprin...

  • Page 5: System and Faucet Diagrams

    Air gap faucet non-air gap faucet system and faucet diagrams puro line system 1/4” line membrane to air gap 3/8” line air gap to drain all tubing is individually labeled and color coded for ease of installation. 1/4” black - connects the feed water valve to the ro pre-filter 3/8” white - connects the...

  • Page 6

    Source & drain water saddle valve shut off the water locate the water shut-off valve for the cold water feed line you choose to use for the supply. Accidentally hooking up the system to the hot supply line will permanently damage the membrane (see conditions for operation). To assure you are using t...

  • Page 7

    Activation, troubleshooting, maintenance activating the system for the first time make sure all water supply/drain lines are secure and free from leakage. Slowly turn the saddle valve counterclockwise until fully open. Check stem seal for leakage. If necessary tighten stem nut lightly. Turn storage ...

  • Page 8

    Good water warehouse warrants its puro line reverse osmosis system to be free from defects in materials and workmanship under normal use within the operating parameters listed below. For a period of five years from the date of purchase good water warehouse will repair or replace any part of the rever...