H&S XRT Pro Installation & Operation Manual - Usa / Ulsd Calibration
20 XRT Pro Installation Manual • www.hsperformance.com
2003 - 2007 6.0l forD PoWersTroke
Usa / UlsD caliBraTion
Power levels
Power Levels can be adjusted on-the-fly at the touch of a button
after Installing the Download to the vehicle. To adjust the Power
Level, select change Power level from the Main Menu.
noTe:
The Power Level ratings listed may not be exact for your particular
vehicle. The listed ratings apply to the out-of-the-box tuning that H&S tuning
devices are shipped with. Any custom downloads may result in different rat-
ings and can be found at www.hsperformance.com/update-instructions.
speed limiter
This option allows for the removal of the factory speed limiter. Most 6.0L Powerstroke trucks
have a 95 MPH speed limiter from the factory. The limiter can be removed completely or left
stock
(this may change so be sure to visit www.hsperformance.com for product updates)
. This option can
only be changed during the Install Download process.
Tire size calibration
(Not currently available for the 2003 - 2007 6.0L Powerstroke. This may change so be sure to visit
www.hsperformance.com for product updates)
This option allows for the re-calibration of the factory
speedometer to adjust for non-stock sized tires. For the most accurate speedometer reading when
using non-stock sized tires, it is best to measure the diameter of the tire using a tape measure rather
than going by the printed tire size. In addition, using a GPS is a great way to dial in your factory
speedometer. Entering a larger tire size will cause the factory speedometer to read higher while en-
tering a smaller tire size will cause the factory speedometer to read lower.
Tire size can be adjusted
from 25” to 40”.
This option can only be adjusted during the Install Download process.
Maxx calibration control
Maxx Calibration Control (MCC) is an advanced engine management software tool that enables
custom tune editing with your H&S tuning device. With the power to control all aspects of engine
and transmission management, MCC gives YOU the ability to control how YOUR engine operates!
When you have exceeded the limits of conventional tuning and want to unleash the power of a
custom tune, look no further than MAXX CALIBRATION CONTROL
noTe:
Applications may vary by vehicle make and model, please check our website to see if MCC is available for your
vehicle at www.hsperformance.com/mcc
Power LeveLs
Stock
. . . . . . . . . . . . . . . . . . . .
0 HP
Tow
. . . . . . . . . . . . . . . . . . . .
40 HP
Street
. . . . . . . . . . . . . . . . .
80 HP
Performance
. . .
120 HP
custom tune, look no further than MAXX CALIBRATION CONTROL
noTe:
Applications may vary by vehicle make and model, please check our website to see if MCC is available for your
vehicle at www.hsperformance.com/mcc
2010 - 2012 6.7L Dodge Cummins Specific Features Continued >>