H3C S7500 Series Operation Manual - page 3
Operation Manual – File System Management
H3C S7500 Series Ethernet Switches
Chapter 1 File System Management
1-2
1.1.2 CF Card Configuration
By installing a CF (compact flash) card in the compact flash slot of a SRPU of an S7500
switch, you can extend the memory space of the switch.
z
With a CF card seated in the compact flash slot, you can access the root directory
of the CF card by executing the cd cf: command.
z
The commands used to manipulate files, such as dir, copy, delete, and move,
apply to the files on a CF card.
z
You can disable a CF card by using the umount cf: command. To use a disabled
CF card again, you need to remove it and install it again.
Perform the following operations to configure a CF card:
To do...
Use the command...
Remarks
Enter the root directory of a CF card
cd cf:
Required
Disable a CF card
umount cf:
Optional
Note:
Currently, only Salience III SRPU supports CF card.
The following table lists the operations that can be performed after you enter a directory
on a CF card.
1.1.3 File System Configuration Tasks
Complete the following tasks to perform file system configuration:
Task
Remarks
Directory-Related Operations
Optional
File-Related Operations
Optional
Storage Device-Related Operations
Optional
Prompt Mode Configuration
Optional
1.1.4 Directory-Related Operations
The file system provides directory-related operations, such as:
z
Creating/deleting a directory
z
Displaying the current directory