The models listed in this manual are not applicable to all regions. Please consult the local agents for the models applicable to your region. Product overview introduction the h3c wa2600 series indoor wlan access points (hereinafter referred to as the wa2600 indoor series) are one of the 802.11n acc...
Figure 1-1 typical networking using the wa2600 indoor series wa2600 wa2600 wa2600 core equipment room radius server wireless nms switch switch switch switch auditorium restaurant or tea house hall or information desk pc pda pc ac figure 1-2 shows the appearance of the wa2600 indoor series. Figure 1-...
Model physical dimensions weight wa2612-agn (diameter × thickness) Φ190 × 60 mm (Φ7.48 × 2.36 in.) 0.5 kg (1.10 lb.) hardware configuration the wa2600 indoor series provide two models. Table 1-2 lists the basic configurations. Table 1-2 device basic configurations model protocols and chassis materia...
Leds wa2610-agn figure 1-3 leds on the wa2610-agn table 1-3 description of the leds on the wa2610-agn led color qty meaning power green 1 displays the power supply status: steady on: the power supply is normal. Off/blinking: the power supply is not well connected or the device works abnormally. 2.4g...
Led color qty meaning 5g (wireless link led) green 1 displays the 5 ghz wireless link status: off: the wireless link is not initialized or the link is faulty. Blinking slowly: the wireless link works normally. Blinking rapidly: data is being transmitted or received. Ethernet (ethernet interface led)...
Wa2612-agn figure 1-4 leds on the wa2612-agn table 1-4 description of the leds on the wa2612-agn led color qty meaning power green 1 displays the power supply status: steady on: the power supply is normal. Off/blinking: the power supply is not well connected or works abnormally. 10/100m (ethernet in...
Led color qty meaning 1000m (ethernet interface led) green 1 displays the status of the 1000 m ethernet interface: steady on: the ethernet interface is in the link-up state. Off: the ethernet interface is in the link-down state. Blinking: data is being transmitted or received at 1000 mbps. 2.4g (wir...
In addition, the wa2610-agn provides a reset button, a wps button (reserved for expansion use) and a security slot. Figure 1-5 interfaces on the wa2610-agn interfaces provided by the wa2612-agn the wa2612-agn provides the following interfaces: a console interface an ethernet interface in addition, t...
Figure 1-6 interfaces on the wa2612-agn table 1-5 describes the interfaces provided by each model. Table 1-5 descriptions of interfaces on the wa2610-agn/wa2612-agn interface silkscreen standards and protocols description console rs/eia-232 the console interface is used for device configuration and ...
10 interface silkscreen standards and protocols description ethernet ieee802.3 ieee802.3u ieee802.3af the ethernet interface can serve as an uplink interface to access the internet or man, and as a poe interface at the same time. When connecting a cable to an interface, pay attention to the interfac...
User manual (h3c wa2612-agn, wl-607) table of contents appendix a regulatory compliance information.................................. A-1 regulatory compliance standards....................................................... A-1 support antennas & accessories information................................
A-1 appendix a regulatory compliance information regulatory compliance standards table a-1 regulatory compliance standards discipline standards emc & rf fcc part 15.207 & 15.209 & 15.247& 15.205 & 15.407 fcc bulletin oet-65c ic rss 210 etsi en 300 328 etsi en 301 893 en 61000-3-2 en 61000-3-3 etsi e...
Support antennas & accessories information this product can only be used with the supplied antenna(s). This product does not contain any user serviceable components. Any unauthorized product changes or modifications will invalidate the warranty and all applicable regulatory certifications and approv...
Information on how to select the country, refer to the “wireless configuration command” module in h3c wireless control manager command manual. 2) intended use: ieee 802.11a/b/g and 802.11n draft 2.0. 3) this product must maintain a minimum body to antenna distance of 20cm.Under these conditions this...
Español [spanish] por medio de la presente h3c corporation declara que el rlan device cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la directiva 1999/5/ce. Ελληνική [greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ h3c corporation ΔΗΛΩΝΕΙ ΟΤΙ rlan device ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ Τ...
Magyar [hungarian] alulírott, h3c corporation nyilatkozom, hogy a rlan device megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/ec irányelv egyéb elõírásainak. Polski [polish] niniejszym h3c corporation oświadcza, że rlan device jest zgodny z zasadniczymi wymogami oraz pozostałymi stosowny...
Norsk [norwegian] h3c corporation erklærer herved at utstyret rlan device er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/ef. A copy of the signed declaration of conformity can be downloaded from: http://www.H3c.Com/portal/technical_documents http://support.3com.Com...
Eu country restriction in 2.4ghz band this device may be used indoors or outdoors in all countries of the european community using the 2.4ghz band: channel 1-13, except where noted below. 1) in france, the output power is restricted to 10 mw eirp when the product is used outdoors in the band 2454 - ...
Europe-restrictions for use of 5ghz frequencies in european community countries allowed frenquecy bands allowed channel numbers countries 5.15-5.35& 5.470-5.725g hz 36,38,40,44,4 6,48,52,54,56, 60,62,64,100, 102,104,108,1 10,112,116,11 8,120,124,126 ,128,132,134, 136,140 austria, belgium, bulgaria, ...
Usa compliance information us federal communications commission statement this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: this device may not cause harmful interference. This device must accept any interference received, including interferenc...
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Rf requirements rf exposure hazard warning this device generates and radiates radio-frequency energy. In order to comply with fcc radio-frequency exp...
Industry canada rf compliance this class b digital apparatus complies with canadian ices-003. Cet appareil numérique de la classe b est conform à la norme nmb-003 du canada. This device complies with rss 210 of industry canada. Operation is subject to the following two conditions: (1) this device ma...
