Haan Power & Finesse SI-75 Instruction Manual - page 9
7
Before Using Your Floor Sanitizer
Using the Handheld Steamer - Operating Instructions
Be sure to read ALL instructions and warnings before using
your Floor Sanitizer.
1.
Handle
2.
Steam Power Switch
3.
Power Indicator Light
4.
Floor Steamer Body
5.
Grip Handle
6.
Storage Hook (rotates 360º)
7.
Power Cord Organizer (bottom)
8.
Main Body Assembly Screw
9.
Handheld Unit Release Buttons
10.
Power Cord
11.
Water Tank Release Button
12.
Detachable Water Tank
13.
Handheld Steamer Body
14.
Handheld Unit (detached)
15.
Angled Nozzle Attachment
16.
Brush Attachment
17.
Small Steam Head Attachment
18.
Small Steam Head Pad
19.
Assembly Screw (x1)
Located in Accessory Bag
20.
Floor Protector / Resting Mat
21.
Carpet Glide
22.
Ultra-Microfiber Pads (x2)
23.
Fresh Rinse Lime & Scale Remover (x12)
24.
Extended Flexible Hose
25.
Handheld Unit Shoulder Strap
26.
Shoulder Strap Connection Loops
27.
Steam Level Button
Helpful Hint:
To extend the life of your
ultra-microfiber Pads,
always place your unit on
the floor protector/resting
mat while the unit heats
up. Attach the ultra-micro-
fiber pad when the unit is
ready to use.
Helpful Hint:
Helpful Hint:
When heated, never leave the ap-
pliance in one spot on any surface
for any period of time. Always
place your floor Sanitizer on the
floor Protector/Resting mat when
stationary.
Always empty water from water
tank after use. To ensure opti-
mum product function use fresh
Rinse
™
once a month.
Helpful Hint:
When using the floor
Sanitizer with the Carpet
glide it will not lift all set-in
stains from your carpet.
our patented ultra-mi-
crofiber pad may be used
to act as a “blotter” for
removing most fresh, wet
spills and stains.
Your floor sanitizer is designed to clean hard floor surfaces that will withstand high
heat. Do not use on unsealed wood or unglazed ceramic floors. On surfaces that
have been treated with wax or some no-wax floors, the sheen may be removed by
the heat and steam action. It is always recommended to test an isolated area of the
surface to be cleaned before proceeding. We also recommend that you check the
use and care instructions from the floor manufacturer.
WARNINg
Using the Carpet Glide - FOR FRESH STAINS
1
4
Place unit on stain. Let stand for
a few seconds. Allow steam to
saturate stain.
gently place unit on ultra-micro-
fiber pad.
2
5
Slowly move unit back and forth
over stain.
use the pad to rub the area
“blotting” out the stain.
“Hands Free”
Removal Tab
3
6
Remove carpet glide from
unit with hands free tab.
Turn unit off. When cooled,
remove ultra-microfiber pad.
1
Before detaching handheld
Sanitizer, make sure the unit is
turned off.
P U S H
2
Press handheld release
buttons inward to release
handheld unit.
3
Remove handheld unit from
floor unit. Do NoT pull power
cord when removing
10
Steam Level Button
The Steam Level Button is located on the handheld unit above the Steam Power Switch. When
cleaning floors the steam level button will automatically be set to release an optimal amount of
steam that will leave floors clean and dry. When the handheld unit is disengaged from the floor
unit the Steam Level Button will automatically switch to a higher steam output setting that is the
ideal power for handheld use.