- DL manuals
- Haas GPS
- GPS
- Text-N-Track H1000
- Installation Manual
Haas GPS Text-N-Track H1000 Installation Manual
Summary of Text-N-Track H1000
Page 1
Page 1 haas gps personal auto management system text-n-track h1000 read this guide before your first installation haas gps system components: (1) haas gps vehicle monitoring unit (model: text-n-track h1000) (1) wire harness with 5 amp fuse.
Page 2
Page 2 contents text-n-track h1000 system components....................................................1 installation technician notice/notes ......................................................3 step 1: online registration ............................................................................
Page 3: Note to Technicians:
Page 3 note to technicians: do not use test lights! All outputs must use relays! Some vehicles may require relays for optional featurs. If you must invert the polarity of a signal, use a relay - do not use a solid state inverter. Notes back-up battery the back-up battery is built into the text-n-tra...
Page 4
Page 4 things you will need before you begin: included with each unit is an installation worksheet or you can find a copy on our website. The worksheet asks you to collect the following info: o the text-n-track h1000 serial number (this is the 20-digit number on the unit label - write it down!) o th...
Page 5
Page 5 1. Online registration online registration is easy. During the registration process, you will configure each new haas gps system specifically for each new customer. You can also set up a temporary account to allow yourself to send and receive test messages. A. Login using an internet browser,...
Page 6
Page 6 b. New customer registration the new customer registration page looks something like this: from the installation worksheet, input the customer contact information in the spaces provided. Note: if the customer contact information is not available, you can fill the fields with dummy info and up...
Page 7
Page 7 c. Configuration after completing the registration, you will then be taken to the customer’s home page, which will look something like this: move the mouse towards the right side of the page to the column marked configuration, and click on the field marked “view/edit”. You will then be taken ...
Page 8
Page 8 the configuration page enables you to customize the haas gps system for each new customer. Using the information from the installation worksheet, fill in the fields in the sections marked “vehicle data,” features installed,” and “alert notifications will be sent for”. The section marked “poin...
Page 9
Page 9 2. Physical installation the haas gps monitoring unit is self-contained. It does not require an external antenna. Both the gps antenna and the cellular antenna are built-in. A basic installation requires only three wired connections: one wire for power (constant 12volt), one for ignition and ...
Page 10
Page 10 gps coverage); and the red led will stop flashing when it locks onto its gps signal (may take up to 5 minutes depending on cellular and gps coverage). Signal strength is confirmed when both leds stop flashing. If the leds do not stop flashing, the haas gps monitoring unit should be re-positi...
Page 11
Page 11 3. Final testing each text-n-track h1000 unit should be tested before delivery to the customer. You can test the unit either by using an internet browser or by using a text messaging-enabled cell phone. Both methods are described below. A. Using an internet browser to test the text-n-track h...
Page 12
Page 12 check the information to verify that the vehicle description is accurate. Move the cursor to the far right side of the page to column marked “vehicle control,” and then click on the field marked “control.” you will then be taken to the vehicle control page, which looks much like this: this p...
Page 13
Page 13 shortly thereafter, a new location report will appear. Receipt of an accurate location report will verify that the text-n-track h1000 unit is operating properly and is ready to be delivered to the customer. Congratulations! You’ve completed the physical installation, the registration, and fi...
Page 14
Page 14 you should receive the location report message on the cell phone shortly thereafter. The message will originate from “notification1@haasgps.Com” and it will include the vehicle’s location, as well as the date and time of the message. At times, network congestion may cause delivery delays. Re...
Page 15
Page 15 4. Advanced installation information 1 - input red +12 vdc positive + 2 - input black ground negative - 3 - input yellow ignition postive + connect to 12v ingition 4 - output gray horn and/or negative - 250 ma car horn and/or light circuits flash lights active negative output 5 - output oran...
Page 16
Page 16 gray — car-finder yellow — ignition orange — starter interrupt green — door lock blue — door unlock white + alarm sense car finder horn/lights – this pulsating negative output may need relay(s) to sound the vehicle’s horns or flash its parking lights. For dual circuit parking lights connect ...