1. DL manuals
  2. Haas+Sohn
  3. Indoor Fireplace
  4. ROMA
  5. Assembly And Installation Instructions Manual

Haas+Sohn ROMA Assembly And Installation Instructions Manual

Summary of ROMA

  • Page 1

    I t e m n o . : 0 6 2 1 8 5 0 1 0 9 0 3 1 v 1 3 h 0 6 1 assembly and installation instructions roma room for type designation and manufacturing number: transfer from nameplate equipment type: manufacturing number: test no. Insert: rrf-29 06 1192 our supply program: oil stoves fireplaces pellet stove...

  • Page 2

    I t e m n o . : 0 6 2 1 8 5 0 1 0 9 0 3 1 v 1 3 h 0 6 2 1 preliminary remarks please read the assembly and operating instructions of your fireplace insert before these installation instructions. The following are additional parts of these installation instructions: “equipment sheet complete”, instal...

  • Page 3

    3 2. When using the fire protection insulating set, mount the two rear wall screen panels (see installation instructions of the fire protection insulating set) to the rear wall of the fireplace. 3. Adjust the fireplace to the correct height using the open-end wrench size 13mm by turning the adjustab...

  • Page 4

    4 artificial stone kit – roma– parts list installation instructions artificial stone kit roma note: prior to installation, check the exact position of the insert. Always ensure that the components are installed level and plumb. 1. First install the lateral components of the fireplace kit in the dry ...

  • Page 5

    5 figure 3: installing the base figure 2: installing the lateral parts figure 1: position fireplace insert figure 4: installing the base left and right.

  • Page 6

    6 figure 5: assembling the fireplace hood bottom + top and the air grill top figure 6: installing the base-and ledge plates and the air grill.

  • Page 7

    7.

  • Page 8

    8 we wish you much pleasure with your fireplace kit by figure 7: dimensions.