Habasit PQ-58 User Manual - Pq-58
Operating instructions 36007
Hot-pressing device
PQ-58
Page 4 of20
Edition: 04/0312
Subject to alterations
1.3
Scope of supply
Qty. Item
1
PQ-58 hot-pressing device packed in a carton box, with
1 Operating
instructions
1.3.1 Available accessories
Also refer to chapter 9.
•
Guide rails of fixed width, inclusive of covering plate:
6 mm
(672006)
3/8"
(672113)
8 mm
(672008)
10 mm
(672010)
1/2"
(672101)
11 mm
(672011)
5/8"
(672114)
12 mm
(672012)
13 mm
(672013)
14 mm
(672014)
3/4"
(672102)
15 mm
(672015)
7/8"
(672109)
16 mm
(672016)
1"
(672103)
18 mm
(672018)
1 1/8"
(672110)
20 mm
(672020)
1 1/4"
(672104)
22 mm
(672022)
1 3/8"
(672105)
25 mm
(672025)
1 1/2"
(672106)
30 mm
(672030)
1 5/8"
(672111)
35 mm
(672035)
1 3/4 "
(672107)
40 mm
(672040)
1 7/8 "
(672112)
50 mm
(672050)
2"
(672108)
and 2 clamps for each guide rail
•
Guide rail of adjustable width, from 25 to 50 mm, including 1 covering plate each for 25, 30, 40, 45
and 50 mm tape width and 2 metal clamps (672201), or from 1/2" to 2", including 1 covering plate
each for the tape widths 1/2", 3/4", 1",1 1/4", 1 1/2", 1 3/4" and 2", and 2 metal clamps (672202).
WARNING
Use only Habasit guide rails. Particularly the use of metallic guide rails is not
admissible, it may destroy the hot-pressing device.
•
Scissors for cutting to length AQ-40 (690020)
•
Scissors for cutting of Flexproof fingers AF-102 (690060)
•
Punching device for Flexproof fingers AF-30 (690280)
•
Cooling tongs CD-60 (690030)
•
Temperature measuring device (N-28714 or N-28715) for checking the pressing temperature