Summary of HB131
Page 1
Habey hb131 mini-itx motherboard user manual v1.0
Page 2: Safety Instructions
Safety instructions 1．please read this manual carefully before using this product. 2．put all unused or uninstalled boards/cards in a static dissipative surface or static shielding bag. 3．always ground yourself to remove any static discharge before touching the board , to place your hands on groundin...
Page 3: Contents
Contents chapter 1 product introduction......................................................................................................1 1.1 specifications .................................................................................................................1 chapter 2 installation ...
Page 4
Ami bios description...........................................................................................................25 bios settings........................................................................................................................25 3.1 main menu .......................
Page 5: Chapter 1. Product
Chapter 1. Product introduction.
Page 6: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 1 chapter 1 product introduction 1.1 specifications form factor ● standard mini-itx motherboard dimension ●170mm×170mm（l×w） cpu ● onboard cedar trail- d chipset ●intel nm10 display ●gpu: vga + lvds ●vga: 1x standard db15 vga, resolution up t...
Page 7: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 2 ● external 4x standard usb 2.0 ports; two 2×5pin usb 2.54 header, to be converted to standard 4x usb 2.0 ports. I/0 ● adopt w83627dhg-p i/o chip ●6x serial ports: 1x db9 serial ports and five 2*5pin header. Com1_com6 support rs232. Com2 al...
Page 8: Chapter 2. Installation
Chapter 2. Installation instructions.
Page 9: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 3 chapter 2 installation instructions 2.1 interfaces location & dimension following picture illustrates the interfaces location and dimension of board hb131. Please take care of some components during the installation. Improper installation ...
Page 10: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 4 4．connect all signal lines, cables, control panel circuit and power supply unit. 5．start the computer and complete bios settings. Key components of this motherboard are integrated circuit, and these components could be easily damaged by el...
Page 11: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 5 with pin2-3 connected. （3）start the computer, then press “del” to enter bios setting and reload optimal defaults. （4）save and exit jcc： setting jcc 1-2 clear cmos, bios back to factory default 2-3 normal status, system default do not clear...
Page 12: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 6 2.4.2 hardware switch for system auto boot upon power on（jat） jat: setting jat open disable auto boot close enable auto boot 2.4.3 com2 jumper setting（j1, j2） j1, j2 jumpers are used to configure com2 transmission mode. Com2 supports rs232...
Page 13: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 7 2.4.4 lvds rated voltage select jumper（j8） please first check the lvds rated work voltage before using it. Com2 rs232（default） com2 rs485 j1 1-3 2-4 j1 3-5 4-6 j2 1-2 j2 3-4 5-6 j1 j2.
Page 14: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 8 j8: setting 3.3v 5v j8 1-2 2-3 2.5 interfaces description please read this manual carefully before installing any external connectors, in case of any damage to the motherboard! 2.5.1 sata ports（sata1, sata2, pwr_out） board provides 2x stan...
Page 15: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 9 sata: pin signal name 1 gnd 2 tx+ 3 tx- 4 gnd 5 rx- 6 rx+ 7 gnd pwr_out: pin signal name 1 +12v 2 gnd 3 vcc 4 gnd.
Page 16: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 10 5 vcc3 note: sata2 & minipci ssd are alternative. If minipcie port supports ssd, then sata2 port will be disabled. System defaults [sata2] port is enabled, minipcie ssd disabled. 2.5.2 serial ports（com1, com2-com6） board provides 6x seria...
Page 17: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 11 9 ri com2_com6: signal name pin signal name dcd 1 2 dsr sin 3 4 rts sout 5 6 cts dtr 7 8 ri gnd 9 10 pin10 com2( rs232/rs485), pins defined as below: pin rs232（default） rs485 1 dcd data- 2 dsr nc 3 rxd data+ 4 rts nc 5 txd nc 6 cts nc 7 d...
Page 18: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 12 vga: pin signal name pin signal name pin signal name 1 red 6 gnd 11 nc 2 green 7 gnd 12 sda 3 blue 8 gnd 13 hsync 4 nc 9 +5v 14 vsync 5 gnd 10 gnd 15 scl lvds: signal name pin signal name vdd_panel 1 2 vdd_panel gnd 3 4 gnd lvds_tx0_dn 5 ...
Page 19: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 13 lvds_tx2_dp 19 20 lvds_tx3_dp jvga: signal name pin signal name red 1 2 gnd green 3 4 sda blue 5 6 hsync gnd 7 8 vsync vga_pin5 9 10 vga_scl_r 2.5.4 lvds backlight control interface（j5, j8） j5: pin signal name 1 +12v 2 bklt_en 3 gnd 4 bkl...
Page 20: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 14 for j8 definition, please refer to chapter 2-section 2.4.4 lvds rated voltage select jumper setting. 2.5.5 lan_usb （usb_lan1, usb_lan2, usb56, usb78， ） external usb & lan ports, two separate sockets provide 2x standard usb 2.0 ports and 1...
Page 21: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 15 signal name pin signal name vcc 1 2 gnd usbd_n5 3 4 gnd usbd_p5 5 6 usbd_p6 gnd 7 8 usbd_n6 gnd 9 10 vcc usb_78: signal name pin signal name vcc 1 2 gnd usbd_n7 3 4 gnd usbd_p7 5 6 usbd_p8 gnd 7 8 usbd_n8 gnd 9 10 vcc note: usb7 port and ...
Page 22: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 16 kbms: signal name pin signal name vcc5 1 2 ms_clk gnd 3 4 ms_data kb_data 5 6 gnd kb_clk 7 8 vcc5 2.5.7 gpio（jgp） general purpose input/output port, 8bit gpio. One 2×5pin header. Ps/2 kb/ms.
Page 23: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 17 gpio: signal name pin signal name sgpi06 1 2 vcc sgpi07 3 4 sgpi033 sgpi034 5 6 sgpi038 sgpi033 7 8 sgpi039 gnd 9 10 gpio26 2.5.8 power interface （atx） board provides one standard atx 20pin power interface..
Page 24: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 18 atx: signal name pin signal name +3.3v 1 11 +3.3v +3.3v 2 12 -12v gnd 3 13 gnd +5v 4 14 ps-on gnd 5 15 gnd +5v 6 16 gnd gnd 7 17 gnd pw-ok 8 18 -5v +5v sb 9 19 +5v +12v 10 20 +5v 2.5.9 fan interface （cpu_fan） board provides one cpu_fan in...
Page 25: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 19 (1)fan current ≤350ma（4.2w, 12v） (2) pls confirm if the fan cable matches the socket cable. Power cable（red） is in the middle. Gnd（black） & fan speed pulse signal line（other color）.Recommend to use fans with speed detection function. Cpu_...
Page 26: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 20 jlpc: signal name pin signal name clk_lpc 1 2 gnd lframe_n 3 4 clk_lpc_48m lpc_rst# 5 6 vcc lpc_ad3 7 8 lpc_ad2 vcc3 9 10 lpc_ad1 lpc_ad0 11 12 gnd smb_clk 13 14 smb_data 3.3vsb 15 16 sio_serirq gnd 17 18 nc(预留 a20gate) pm_sus_stat# 19 20...
Page 27: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 21 fp_audio: signal name pin signal name mic2*l 1 2 agnd mic2*r 3 4 line1*l line2*r 5 6 line1*r agnd 7 8 nc line2*l 9 10 agnd 2.5.12 parallel port（lpt) board provides one standard parallel port. Fp_audio.
Page 28: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 22 lpt: signal name pin signal name lpt_stb# 1 2 lpt_afd# lpt_pdq0 3 4 lpt_err# lpt_pdq1 5 6 lpt_init# lpt_pdq2 7 8 lpt_slin# lpt_pdq3 9 10 gnd lpt_pdq4 11 12 gnd lpt_pdq5 13 14 gnd lpt_pdq6 15 16 lpt_busy lpt_pdq7 17 18 lpt_pe lpt_ack# 19 2...
Page 29: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 23 jfp: signal name pin signal name power led+ 1 2 power led- hd led+ 3 4 hd led- vcc 5 6 buzzdata- reset button 7 8 gnd power button 9 10 gnd please follow the table below to connect, pay attention to the anode (+) and cathode (-), otherwis...
Page 30: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 24 1）system power led pins (pin1, pin2 for pwled) connect system power led cable with these pins.（pin 1 is led anode）when system is power on, power led is on；when system is power off, power led is off. 2）hdd led pins（pin 3/4: hdd led） case p...
Page 31: Chapter 3. Bios Setup
Chapter 3. Bios setup.
Page 32: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 25 chapter 3 bios setup ami bios flash bios functions as a bridge connecting hardware and operating system. Hardware and software are upgrading all the time, so when your system goes wrong, for example, your system can not support the newest...
Page 33: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 26 2. When system pops out the prompt "press to enter setup" , please press key to enter bios setup interface. 3. Use the “←↑→↓”to select the option which your want to modify, press to go to the sub-menu. 4. Use the “←↑→↓”and to modify the v...
Page 34: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 27 system date system date format: week / month/ day/ year 3.2 advanced menu aptio setup utility - copyright (c) 2011 american megatrends,inc enabled or disabled boot option for legacy network devices. Legacy oprom support launch lan1 pxe op...
Page 35: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 28 f9：optimized defaults f10：save&exit esc：exit version 2.14.1219. Copyright（c）2011 american megatrends，inc. Acpi sleep state select the highest acpi sleep state the system will enter when the suspend button is pressed. S1（cpu stop clock）:cp...
Page 36: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 29 3.2.3 cpu configuration aptio setup utility - copyright (c) 2011 american megatrends,inc enabled for windows xp and linux （os optimized for hyper-threading technology） and disabled for other os（os not optimized for hyper-threading technol...
Page 37: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 30 generation cpu by intel, which can help reduce system exposure to viruses and malicious code. Edb allows the processor to classify areas in memory where application code can or cannot execute. To use execute disable bit you must have wind...
Page 38: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 31 version 2.14.1219. Copyright（c）2011 american megatrends，inc. Serial-ata controller（s） enable or disable serial-ata controller. Sata mode to setup sata mode: [ahci] or traditional [ide]. Serial ata port1/2 to enable or disable the two port...
Page 39: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 32 uhci #1 (ports 0 and 1) [enabled] uhci #2 (ports 2 and 1) [enabled] uhci #3 (ports 4 and 1) [enabled] uhci #4 (ports 6 and 1) [enabled] usb 2.0 (ehci) support [enabled] ehci hand-off [disabled] usb hardware delays and time-outs: usb trans...
Page 40: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 33 3.2.6 supper io configuration aptio setup utility - copyright (c) 2011 american megatrends,inc set parameters of parallel port (lpt/lpte) super io configuration parallel port configuration serial port 1 configuration serial port 2 configu...
Page 41: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 34 device setting（read only） device setting: parallel port irq and address. Change setting change parallel port setting, including its irq & address. Recommend to select default setting [auto]. Device mode setup parallel device mode, includi...
Page 42: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 35 change setting change serial port setting, including its irq and base address. Recommend to select the default setting [auto]. Serial port 2/3/4/5/6 configuration follows the steps mentioned above 3.2.7 h/w monitor aptio setup utility - c...
Page 43: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 36 3.2.8 serial port console redirection aptio setup utility - copyright (c) 2011 american megatrends,inc console redirection enable or disable. Com1 console redirection [disabled] console redirection settings serial port for out-of-band man...
Page 44: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 37 3.3.1 north bridge aptio setup utility - copyright (c) 2011 american megatrends,inc select the video device which will be activated during post. This has no effect if external graphics present. Boot display device [vbios default] active l...
Page 45: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 38 3.3.2 south bridge aptio setup utility - copyright (c) 2011 american megatrends,inc audio controller audio controller [enabled] lan1 controller [enabled] lan2 controller [enabled] restore ac power loss [power on] →←：select screen ↑↓：selec...
Page 46: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 39 3.4 boot menu aptio setup utility - copyright (c) 2011 american megatrends,inc number of seconds to wait for setup activation key. 65535(0× ffff) means indefinite waiting. Boot configuration setup prompt timeout 1 bootup numlock state [on...
Page 47: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 40 hard drive bbs priorities this option contains hdds that can be used as boot device. If multiple hdds in this option, priority should set for these hdds, then the prior one will show in boot option #1. 3.5 security menu aptio setup utilit...
Page 48: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 41 3.6 save & exit menu aptio setup utility - copyright (c) 2011 american megatrends,inc restore/load default values for all the setup options. Load defaults save changes and exit discard changes and exit →←：select screen ↑↓：select item ente...
Page 49: Appendix
Appendix.
Page 50: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 42 appendix appendix 1: watchdog programming guide watchdog reference code（asm） -------------------------------------------------------------------------------------------------------------- set the port to realize watchdog function through ...
Page 51: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 43 appendix 2: irq & system memory map,1st mb memory map irq： priority interrupt# interrupt source 1 nmi parity error detected 2 00 system timer 3 01 available - 02 interrupt from controller 2 (cascade) 4 08 system cmos/real time clock 5 09 ...
Page 52: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 44 dfd00000 – dfd03fff realtek pcie gbe familly controller dfd00000 – dfdfffff intel (r) n10/ich7 family pci express root port – 27d2 dfd04000 – dfd04fff realtek pcie gbe familly controller dfe00000 – dfe03fff realtek pcie gbe familly contro...
Page 53: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 45 appendix 3: glossary acpi advanced configuration and power management。acpi specifications allow o/s to control most power of the computer and its add-ons bios basic input/output system. It is a kind of software including all in/out contro...
Page 54: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 46 memory bus width. Dram dynamic random access memorizer. It ’s a normal type of memory often with a transistor and a capacitance to store 1 bit. With the development of the technology, more and more types of dram with different specificati...
Page 55: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 47 normal situation and work well. Ps/2 a keyboard & mouse connective interface specification developed by ibm.Ps/2 is a din interface with only 6pin; it also can connect other devices, like modem usb it is the universal serial bus for short...
Page 56: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 48 appendix 4: install driver please install the driver as per the following steps: insert the programmed disk into cd-rom, so installation of the driver can be made either automatically or manually. Now manually installation instructions ar...
Page 57: Habey Hb131
Habey hb131 intel cedar trail powered mini-itx motherboard 49 for more information, please visit www.Norco-group.Com the product information in this user manual is subject to change without prior notice. Norco reserves the right to revise and to explain finally..