Hach LDO User Manual - Section 10
Compliance Information
Page 37
Section 10
Compliance Information
Hach Co. certifies this instrument was tested thoroughly, inspected and found to meet its published
specifications when it was shipped from the factory.
The Model sc100 Controller/sc1000 Controller with the LDO Probe has been tested and is
certified as indicated to the following instrumentation standards:
Product Safety
This equipment is suitable for use in both non-hazardous and Class 1, Division 2, Groups A, B, C,
D Hazardous Locations with specified sensors when installed per installation control drawing
58600-78.
UL 61010A-1 (ETL Listing # 65454)
FM STDs 3600 & 3611 (ETL Listing # 65454)
CSA C22.2 No. 1010.1 (ETLc Certification # 65454)
CSA STD C22.2 No. 213-M1987
(ETLc Certified by Hach Company to EN 61010-1 Amds. 1&2 (IEC1010-1) per 73/23/EEC,
supporting test records by Intertek Testing Services.
Immunity
This equipment was tested for industrial level EMC per:
EN 61326
(EMC Requirements for Electrical Equipment for Measurement, Control and
Laboratory Use)
per 89/336/EEC EMC:
Supporting test records by Hach Company, certified
compliance by Hach Company.
Standards include:
IEC 1000-4-2:1995 (EN 61000-4-2:1995) Electrostatic Discharge Immunity (Criteria B)
IEC 1000-4-3:1995 (EN 61000-4-3:1996) Radiated RF Electromagnetic Field Immunity
(Criteria A)
IEC 1000-4-4:1995 (EN 61000-4-4:1995) Electrical Fast Transients/Burst (Criteria B)
IEC 1000-4-5:1995 (EN 61000-4-5:1995) Surge (Criteria B)
IEC 1000-4-6:1996 (EN 61000-4-6:1996) Conducted Disturbances Induced by RF Fields
(Criteria A)
IEC 1000-4-11:1994 (EN 61000-4-11:1994) Voltage Dip/Short Interruptions (Criteria B)
Additional Immunity Standard/s include:
ENV 50204:1996 Radiated Electromagnetic Field from Digital Telephones (Criteria A)
Emissions
This equipment was tested for Radio Frequency Emissions as follows:
Per 89/336/EEC EMC: EN 61326:1998
(Electrical Equipment for measurement, control and
laboratory use—EMC requirements) Class “A” emission limits. Supporting test records by
Hewlett Packard, Fort Collins, Colorado Hardware Test Center (A2LA # 0905-01) and certified
compliance by Hach Company.
Standards include:
EN 61000-3-2 Harmonic Disturbances Caused by Electrical Equipment
EN 61000-3-3 Voltage Fluctuation (Flicker) Disturbances Caused by Electrical Equipment
Additional Emissions Standard/s include:
EN 55011 (CISPR 11), Class “A” emission limits