Haglof Vertex Laser II VL402 Operator's Manual - page 40
Vertex Laser VL402 V1.1 enu
© Haglöf Sweden AB 2010
40
S A F E TY I NF OR M A TI ON
Vertex Laser VL402 USA: 21CFR 1040.10, 1040.11 FCC Part 15 Class B; EU EN60825-1:1994 + all EU EMC directive
Type of equipment Distance and angle meter
Brand name or trade mark Vertex Laser
Manufacturer’s name, address, telephone & fax no
Haglöf Sweden AB, Klockargatan 8, SE-882 21 Långsele, Sweden
Tel: +46 620-25585, Fax: +46 620-20581,
info@haglofsweden.com
;
www.haglofsweden.com
The Vertex was CE marked 1999
W A RRA NT Y A ND S E RVIC E INF O RMA T ION
Haglöf Sweden AB warrants that this product shall be free from defects in materials and workmanship, under normal intended use, for a
period of 12 months after date of shipment. The warranty excludes the batteries, the accessories and any written materials. The warranty
does not apply if the product has been improperly installed, improperly calibrated or operated in a manner not in accordance with the
user’s guide. Warranty is also automatically expired if the product has been opposed to external force and warranty is not applicable for
cosmetic defects. The one-year limited warranty time covers obvious fabrication defects. Defects in the electronic components that are
impossible for the manufacturer to detect prior to assembling and shipping of the product may occur. Haglöf Sweden AB can in no case be
responsible for problems of this nature and has no liability for any loss of business, profits, savings, consequential damages or other
damages resulting from use of the products described. Signs of misuse, cosmetic damage, accidents or equal automatically withdraw the
warranty. The warranty is valid in the country where your Haglöf product has been purchased. A product covered by warranty will be
object to exchange, service, and repair or according to special agreement between seller and buyer, within the frames of the limited
warranty. Haglöf Sweden reserves the right to determine which option will be most suitable for each separate case after having examined
and evaluated the product.
IMPORTANT ISSUES:
•
For a valid warranty, a copy of invoice or dated receipt of your purchase must be presented. The serial number of the returned
product has to be clearly stated upon return. Go to
http://www.haglofsweden.com/PDF/HaglofRMA.pdf
for return form/turn to your
supplier for assistance.
•
The return freight to us is on buyer’s expense. After warranty repair or exchange, the return freight to you is on our expense. If
warranty has expired or is null and void, all freights are on buyer’s expense.
•
If no original invoice can be presented upon shipment, or if two years or more have passed from date of purchase, a customs fee will
be added by the applicable customs authorities and possibly in receiving country as well. These fees are on buyers account.
•
We perform repair and service of products where warranty has expired when possible. Cost estimation will be sent to you after
evaluating the returned product for cost approval. Please also see above paragraph on customs fees.
•
Please do not hesitate to contact us or any Haglöf Sweden AB representative for questions or comments!
Any signs of misuse or negligence automatically withdraw our warranty commitments
S OF T W A RE
© Copyrights of Haglöf Sweden AB Software belong to Haglöf Sweden AB. Unauthorized duplication is prohibited. Haglöf Sweden AB is
registered trademark and VERTEX is a recognized trademark of Haglöf Sweden AB. Production is made in Sweden.
Haglöf Sweden and its suppliers cannot warrant the performance or results when using the firmware, software or hardware, nor the
documentation. No warranties or conditions are made; neither expressed nor implied, of merchantability, suitability or special fitness for
any particular purpose. If software problems appear, please contact your programmer for support. Haglöf Sweden takes no responsibility
for loss of income, time, or problems and delays due to problems in soft- or hardware of products. *Copyrights of all software & firmware
made by Haglöf Sweden belong to Haglöf Sweden* Any lists and/or information of software for any Haglöf Sweden AB products should be
considered as brief descriptions and not as a complete guide to what may and may not be available. For further details, please see
ORGALIME SW01, General Conditions for Computer Software, and Supplement to ORGALIME S 2000 or ORGALIME SE 94.