Ke18 pc keyboard encoder user manual toll free 888-690-9080 phone: (540) 465-4677 fax: (540) 465-4678 monday through friday, 8:00 am to 5:00 pm (est) sales@hagstromelectronics.Com www.Hagstromelectronics.Com 1986 junction road, strasburg, va 22657 copyright © 2016 hagstrom electronics, inc. V. 11.15...
Thank you for purchasing the hagstrom electronics, inc. Ke18. This product is confi gurable in a variety of ways to meet your specifi c requirements. Please take a few minutes to read this manual before using your ke18. Table of contents introduction to the ke18 1 confi guring the ke18 jumpers 2 int...
Introduction to the ke18 the ke18 pc keyboard encoder is a tool for interfacing switches or keypads to your computer’s keyboard input. It provides all of the necessary keyboard communication to your computer, and can therefore take the place of the keyboard. The ke18 also features a pass through por...
Confi guring the ke18 jumpers the ke18 is designed to be easy to use. There are 3 jumpers located on the board which allow for selection of various modes. These jumpers must be set before using the product. Jumper 1 this jumper selects the repeat function of the inputs on the ke18’s i/o header. With...
Jumper 3 use this jumper to select the type of pc with which the ke18 will be used. With this jumper removed (the most commonly used setting), the ke18 operates in the ps/2 “at” mode, compatible with pentium and x86 computers. When this jumper is in place, the ke18 will operate as a pcxt type keyboa...
Interfacing to the ke18 i/o header interface of the ke18 to switches and keypads is accomplished by connection to the 40 pin dual row i/o header. Each of the pins of the header is connected in parallel with the adjacent pin. This provides 20 individual interface signals, with both the end pins being...
Interfacing to the ke18 i/o header interface of the ke18 to switches and keypads is accomplished by connection to the 40 pin dual row i/o header. Each of the pins of the header is connected in parallel with the adjacent pin. This provides 20 individual interface signals, with both the end pins being...
Jumper 3 use this jumper to select the type of pc with which the ke18 will be used. With this jumper removed (the most commonly used setting), the ke18 operates in the ps/2 “at” mode, compatible with pentium and x86 computers. When this jumper is in place, the ke18 will operate as a pcxt type keyboa...
Confi guring the ke18 jumpers the ke18 is designed to be easy to use. There are 3 jumpers located on the board which allow for selection of various modes. These jumpers must be set before using the product. Jumper 1 this jumper selects the repeat function of the inputs on the ke18’s i/o header. With...
Introduction to the ke18 the ke18 pc keyboard encoder is a tool for interfacing switches or keypads to your computer’s keyboard input. It provides all of the necessary keyboard communication to your computer, and can therefore take the place of the keyboard. The ke18 also features a pass through por...
Thank you for purchasing the hagstrom electronics, inc. Ke18. This product is confi gurable in a variety of ways to meet your specifi c requirements. Please take a few minutes to read this manual before using your ke18. Table of contents introduction to the ke18 1 confi guring the ke18 jumpers 2 int...
Ke18 pc keyboard encoder user manual toll free 888-690-9080 phone: (540) 465-4677 fax: (540) 465-4678 monday through friday, 8:00 am to 5:00 pm (est) sales@hagstromelectronics.Com www.Hagstromelectronics.Com 1986 junction road, strasburg, va 22657 copyright © 201 7 hagstrom electronics, inc. V. 11.1...
