Whole house water filter installation instructions model hf-600
Shut-off valve 5-micron pre-filter hf-600 48" 27" 5-micron pre-filter unit hf-600 1 2 3 4 5 install kit: 1 – 1 filter housing wrench 2 – 1 ball-type shut-off valve 3 – 4 nipples ¾ ”x3” 4 – 2 unions 5 – 1 hose adaptor contents these items included with standalone systems all installation components i...
Installation instructions 1. Keep the unit in an upright position at all times. 2. Remove the red shipping caps from the inlet & outlet ports on the main housing. 3. Precondition the unit by “surge flushing”: it is very important that this system is flushed properly prior to final installation. The ...
Use and care customization options are available to address any specific concerns you may have. The best way to establish your specific needs is to conduct a water test. Contact us by phone: (888) 245-3114 or online: www.Hahnfiltration.Com, to make arrangements and get recommendations. Component one...
Operating specifications 1. Read all precautions, installation, and operating instructions carefully and completely before installing the unit. 2. Do not install this unit where the line pressure may exceed 100 psi. Operating pressure range: 20psi – 100psi. 3. The rated service flow is seven gallons...
* scale reduction not nsf certified clean water throughout your home, while extending the life of your appliances by reducing sediment and scaling. *.
Pure satisfaction all hahn filtration products offer a 90-day 100% satisfaction guarantee. (a 6-year warranty is included, which covers defects in materials and workmanship.) if for any reason you are not satisfied with your purchase, simply call us or the dealer you purchased from. A return authori...
Hf-600_om_201403 manufactured by sink warehouse, lp 4601 spicewood springs rd, suite 1-100, austin, texas 78759 (888) 245-3114 • www.Hahnfiltration.Com system tested and certified by nsf international against nsf/ansi standard 42 for the reduction of the claims specified on the performance data shee...
