HAI UPB 60A00-1 Installation And Operating Instructions

HAI UPB™ Appliance Module 

     Installation and Operating Instructions 

For the following Models: 

60A00-1 HAI 15A Appliance Module  

READ THESE INSTRUCTIONS BEFORE INSTALLING DEVICE  

This HAI UPB™ Appliance Module is intended for installation in accordance with the National Electrical Code and local codes and 

regulations.  Retain these instructions for reference.  

This product is for indoor use only.   

HAI UPB™ Appliance Module Overview 

The HAI UPB™ Appliance Module (Figure 1) is a plug-in device that incorporates the UPB™ two-way powerline communication 

technology, which gives it the ability to be remotely controlled by UPB™ compatible controllers.  The Appliance Module has one 

UPB™ controllable outlet that can sense the load’s local on/off switch (switch trigger) to turn the load on even after it was turned off 

using UPB™ control.  

Note: The switch trigger feature is disabled by default; it may not work for all types of loads (e.g. fluorescent lighting loads). 

The HAI UPB™ Appliance Module is also capable of transmitting UPB™ messages when the local load switch is used to turn the 

load on or off. 

Each appliance module can be configured to custom fit an individual’s lifestyle and desires.   

UPB Controlled

Outlet

Pushbutton

LED

Figure 1 - HAI UPB™ Appliance Module 

60I00-1, Rev A