+12v~24v in 1 1 gnd 2 vin 12~24v 3 alarm reset 4 alarm reset 5 sos switch panic button 6 sos switch panic button 7 ✕ 8 burglar trigger ( * ) 9 remote relay 1 ( ** ) 10 remote relay 1 ( ** ) 11 remote relay 2 ( ** ) 12 remote relay 2 ( ** ) 2 3 4 5 6 7 8 9 10 11 12 tapping microphone gps data output ...
Main features — optional car kits * support gsm, sms full function multi-purpose tracking * gps real-time surveillance tracking * real-time in-car tapping * all aspect protections by using gsm in dial up or sms network to inform the host globally * moving sensor real time inform when the car towed o...
When use and connect the hi-601vt device and the car kits, the power source must directly come from the car battery. When install the hi-601vt car kits, we strongly suggest that the car kit can not take power between the in-car computers or the wires controlled by the car key. Please use the dedicat...
Important: please make sure the + - icons on the battery and only done by professional electric technician. The plus ( + ) and minus ( - ) wiring has to be correct. Otherwise, the device will damaged by the wrong wiring. If you want to connect the wires with traditional way by using the tape, do mak...
Do not connect the plus ( + ) power wire directly to the car kit. This action could cause the hi-601vt and the car kit circuit damage when install the devices, connect the power wires to the car battery first and make sure the connections are correct. Then, connect the wires on the other end to hi-6...
Gps receiver inside hi-601vt must “see” the sky for some security reasons, user might hide hi-601vt somewhere in car or in the bag. Please make sure no metal or similar material above the hi-601vt main unit. In case of must put the hi-601vt under certain metal material (like car trunk or under passe...
Hi-601vt all aspect multi-function hi-601vt provides optional anti-thief and alert system to inform the host in real time. User can handle the problem when the situation happened. The purpose of the vibration moving sensor is to sense the external abnormal movements: such as, the car gets external i...
Will changed when the above intrusion happen). The microwave will react and inform the host by phone call or sms message (the message will show “ alarm ”) when the sensor not sensing any abnormal situation in 10 minutes, the systems will enter into alert status. When someone cut off the hi-601vt mai...
In-car tapping function when anti-thief function enabled, hi-601vt will call to the pre-set telephone numbers to inform the host. Beside, at any time, any where, the host can dial the telephone number inside hi-601vt and press 8 to hear the sound (or someone talking) inside the car and press ✳ to ba...
Sos emergency for help when the car kits installed inside the car, host can wire the panic button secretly and only the host know where the button is. When host got hijack, host can push the panic button and hi-601vt will immediately dial back the pre-set 3 sets telephone numbers sequentially to som...
Gps car navigation function by connect the optional bluetooth box (hi-403btcube), the hi-601vt can also act as an in-car gps receiver and user can use it as a normal bluetooth gps receiver. Led indicator: blinking: searching host device stay on: bluetooh connected pin assignment: 4 3 2 1 6 5 6 pin p...
Permanent power on installation example: hi-601vt connected to car battery via car kit control box 51 51.
When used with the car battery cable for permenent power on installation, do make sure hi-601vt main unit can “see” the sky (no metal material on above) so that the gps inside can get 3d fixed. In case of hiding hi-601vt inside car trunk, please use the gps (mmcx) external antenna. Mmcx external ant...
Permenent power on installation example: hi-601vt connected to car battery with the battery cable 53 53.
