- DL manuals
- Haier
- Air Conditioner
- 18HA03R1
- Operation Manual
Haier 18HA03R1 Operation Manual
Summary of 18HA03R1
Page 1
No. Split type room air conditioner operation manual please read this operation manual before using the air conditioner. H2sm-14ha03/r1 h2sm-18ha03/r1.
Page 2
Before disposing an old air conditioner that goes out of use, please make sure it's inoperative and safe. Unplug the air conditioner in order to avoid the risk of child entrapment. It must be noticed that air conditioner system contains refrigerants, which require speciali- zed waste disposal. The v...
Page 3
For the purpose of the safety,the air con- ditioner must be properly grounded in acco- rdance with specifications. Always remember to unplug the air conditioner before openning inlet grill. Never unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pull straight out ...
Page 4
Indoor unit parts and functions inlet grille air filter vertical flap use remote controller to adjust up and down air flow. (don't adjust it manually.) power indicator lights up when unit starts. Timer mode indicator lights up when timer operation is selected. Operation mode indicator remote signal ...
Page 5
Parts and functions cooling indoor maximum:d.B/w.B 32 o c/23 o c 24 o c/18 o c -7 o c/-8 o c 43 o c/26 o c 18 o c 27 o c 15 o c 18 o c/14 o c maximum:d.B/w.B minimum:d.B maximum:d.B minimum:d.B minimum:d.B/w.B maximum:d.B/w.B minimum:d.B/w.B outdoor indoor outdoor heating 2. If the supply cord is da...
Page 6
5 hints after replacing with new batteries, remote controller will conduct self-check, displaying all information on lcd. Then, it will become normal. Buttons and display of the remote controller. Parts and functions 1.Mode display auto cool dry heat fan 2. Swing display 3. Fan speed display 4. Heal...
Page 7
6 hints after replacing with new batteries, remote controller will conduct self-check, displaying all information on lcd. Then, it will become normal. Clock set when unit is started for the first time and after replacing batteries in remote controller, clock should be adjusted as follows: press cloc...
Page 8
7 operation when in use, put the signal transmission head directly to the receiver hole on the indoor unit. The distance between the signal transmission head and the receiver hole should be within 7 m without any obstacle as well. Don't throw the controller, prevent it from being damaged. When elect...
Page 9
8 operation (4) unit stop (1) unit start mode changes as follows: press on/off button, unit starts. Previous operation status appears on display. (not timer setting) power indicator on indoor unit lights up. (2) select operation mode press mode button. For each press, operation auto cool dry heat fa...
Page 10
Operation press mode button. For each press, operation recommendations: 9 cool,heat and dry operation use cool in summer. Use heat in winter use dry in spring, autumn and in damp climate. (1) unit start mode changes as follows: press on/off button, unit starts. Previous operation status appears on d...
Page 11
10 (5) air flow direction adjustment after operation mode is selected, vertical flap will open automatically according to the mode. Referring to the fig. Cool heat cool heat about 10 o about 60 o about 10 o about 45 o about 60 o better set a temp. Difference of 3-5 c between indoor and outdoor temp....
Page 12
11 operation timer operation you can let unit start or stop automatically at following times: before you wake up in the morning, or get back from outside or after you fall asleep at night. Set clock correctly before starting timer operation timer on/off power indicator on indoor unit lights up. (1)a...
Page 13
12 timer on-off timer on-off to cancel timer mode power indicator on indoor unit lights up. (1)after unit start, select your desired operation mode. Operation mode will be displayed on lcd. On off on off timer on timer offtimer on-off blank every time the button is pressed, display changes as follow...
Page 14
13 operation health mode operation (1) press the on/off switch. (2) press the "health" once," " is displayed, now the air conditioner is operating the health function. (3) press the "health"again,then the health function stops. The anion generator in the air conditioner can generate a lot of anion t...
Page 15
Pi pi...Pi 14 emergency and test operation use this operation only when the remote controller is defective or lost. When the emergency operation switch is pressed,the" pi "sound is heard once, which means the start of this operation. In this operation, it is possible to change the settings of temper...
Page 16
15 comfortable sleep operation in cool mode sleep in selected mode. Before going to bed at night, you can simply press the sleep button and unit will bring you a sound one hour after sleep mode starts, temp. Will become 1 o c higher than temp. Setting. After running for another 1 hour, temp. Rises b...
Page 17
16 maintenance different models have different appearance cleaning of unit casing cleaning of remote controller cleaning of air filter cut off power supply before cleaning unit casing with soft cloth. In case of heavy stain, clean it with neutral detergent. Squeeze water in the cloth, wipe off the d...
Page 18
Air filter air purifying filter 4 6 1 2 3 5 17 maintenance replacement of purifying filter open the inlet grille open the inlet grille by pushing each end of the inlet grille upward. Detach the standard air filter slide the knob slightly upward to release the filter,then withdraw it. Detach the air ...
Page 19
18 maintenance better use of air conditioner proper room temperature. Cleaning of the air filter. Effective use of the timer. Closing of doors and windows during operation never fail to observe the followings do not sprinkle water over the unit. Do not block the inlet or outlet. Do not pull power pl...
Page 20
19 trouble shooting before asking for service, check the following first. Normal performance inspection noise is heard phenomenon cause or check points the system does not restart immediately. Smells are generated. Mist or steam are blown out. Multiple check does not work at all. Poor cooling applic...