Haier AB422BCBAA User Manual - Dismantle and Install Louver
17
Clean the air outlet and casing
Notice
Do not use gasoline, benzene, diluent, polish powder or liquid pesticide
to clean.
Do not use the hot water over 50* to clean to avoid discoloration
or deformation.
Use soft dry cloth to clean.
If cannot remove the dust, use water or neutral detergent.
If the louver of the air conditioner is too dirty, it may be dismantled (as
the following described) for cleaning.
Dismantle and install louver
Notice
When use water to clean the louver, do not clean it to hard, otherwise
the fuzz on the surface maybe fall off.
2.Dismantle louver
1.Fix the louver at the lowest position.
Referring to SWING operation.
Loosen the screws at the two ends of the louver.
3.Install louver
Slightly rotate the louver, the
extruding edges at the ends of the
air inlet can be inserted into the
louver groove, then tighten the
screws.
Instruction
For details, please consult the after-sales
service worker.