Haier AC282ACBCA Operation Manual

Manual is about: CONVERTIBLE TYPE AIR CONDITIONER

Summary of AC282ACBCA

  • Page 1

    Operation manual no. 0010572033 convertible type air conditioner ac282acbca au282ahbca (hcfu-28hd03/r1) ac42nacbca au42naibca (hcfu-42hd03/r1).

  • Page 2: Contents

    Contents cautions .......................................................................... Safety precautions ..................................................... Features and functions ............................................ Name of parts .......................................................

  • Page 3: Cautions

    1 cautions disposal of the old air conditioner before disposing an old air conditioner that goes out of use, please make sure it's inoperative and safe. Unplug the air conditioner in order to avoid the risk of child entrapment. It must be noticed that air conditioner system contains refrigerants, wh...

  • Page 4: Cautions

    Cautions 2 for the purpose of safety, the air conditioner must be properly grounded in accordance with specifications. Always remember to unplug the air conditioner before opening inlet grill. Never unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pull straight o...

  • Page 5: Safety  Precautions

    3 safety precautions warning! Danger! Caution! For series 28,42, the breaker of the air conditioner should be all-pole switch; and the distance between its two contacts should be no less 3mm. Such means for disconnection must be incorporation in the fixed wiring. Use copper wire only. All the cables...

  • Page 6: Features And Functions

    4 features and functions automatic operation sleep heat & cool type merely press the on/off button, and the unit will begin automatic operation in any of the heating, cooling and blow modes as appropriate, in accordance with the thermostat setting and the actual temperature of the room. Cooling type...

  • Page 7: Name of Parts

    Name of parts 5 for series 28 for series 42 fig.2 outdoor unit fig.1 indoor unit for series 42 for series 28.

  • Page 8: Introduction To Spare Parts

    Buttons and display of the wire controller. Cautions: on cooling only unit, heating mode is not available. Note: the above information is the explanation of the displayed information therefore varies with those displayed in actual operation. Clock used to set correct time. Timer used to select timer...

  • Page 9: Operation

    Operating lamp buttons and display of the wire controller. Dry cool auto fan speed sleep timer on timer off clock temp. Fan operation heat clock set when unit is started for the first time, clock should be adjusted as follows: press clock button, "am"or "pm" flashes. Press or to set correct time. Ea...

  • Page 10: Installation

    8 installation warning ! Caution ! Please ask the dealer or specialist to install, never try by the users themselves. After the installation please be sure of the following conditions. Incorrect installation may cause water leaking, shock and fire hazard. Please call dealer to install the air-condit...

  • Page 11: Guide To Operation

    (4) unit stop press on/off button. Only time and room temp remains on lcd. All indicators go out. Vertical flap closed automatically. 9 guide to operation mode fan swing temp clock set timer sleep reset filter reset on/off 1 4 3 2 am room fan operation enjoy yourself by just a gentle press. (1) unit...

  • Page 12: Guide To Operation

    Auto run, cool,heat and dry operation use cool in summer. Use heat in winter. Use dry in spring,autumn and in damp climate. (1) unit start (2) select operation mode (3) select temp. Setting press on/off button, unit starts. Previous operation status appears on display (not timer setting). Power indi...

  • Page 13: Guide To Operation

    Guide to operation on mode fan swing temp clock set timer sleep reset filter reset on/off am am 1 2 4 3 set timer operation hints set clock correctly before starting timer operation. You can let unit start or stop automatically at following time: before you wake up in the morning, or get back from o...

  • Page 14: Guide To Operation

    Just press timer button several times until timer mode disappears. 12 guide to operation on off mode fan swing temp clock set timer sleep reset filter reset on/off pm am 1 5 6 4 2 3 set blank on off on off timer on-off operation mode will be displayed on lcd. Power indicator lights up. Every time th...

  • Page 15: Guide To Operation

    Am 13 guide to operation at night, before going to bed you can press down the sleep button on the controller and the air- conditioner will run by the comfortable sleeping mode to make you sleep more comfortable. In cooling, dehumidifying mode in heating mode comfortable sleep note: in auto mode, uni...

  • Page 16: Guide To Operation

    Guide to operation 14 adjusting up/down air flow direction up/down direction can be adjusted by using the swing button on the remote controller. Each time pressing this button, the mode changes in the following sequence. Swing no indication (louver stopped) change to the airflow mode. Louver stopped...

  • Page 17: Guide to Operation

    Power failure compensation (to be applied for a necessary situation) : setting method: when the remote controller is on (excluding timer mode and fan mode), press the "sleeping" button on the remote controller 10 times within 5 seconds, and after the buzzer rings 4 times, the air conditioner will en...

  • Page 18: Cleaning and Care

    16 1. Press the two buttons on the filters, until you hear a sound of click. 2. Pull the filters upward to remove them from the intake grill. Cleaning and care caution! Before cleaning the air conditioner ,be sure to turn it off and disconnect the power supply cord. Be sure the intake grill is insta...

  • Page 19: Trouble Shooting

    17 trouble shooting followings are not problems sound of water flowing is not a problem. Sound of cracking is heard. Smell are generated. During operation, white fog or steam comes out from the indoor unit. No outlet air or fan speed can't be changed in dry mode. In cooling operation, unit switches ...

  • Page 20: Trouble Shooting

    18 before ask for services, please first check your unit against the following. Air conditioner won't start. Poor cooling or heating is power supply switch turned on? Power supply switch is not set at on. Is city power supply normal? Is leakage current breaker activated? This is very dangerous, plea...

  • Page 21: Operating Tips

    19 operation and performance *heating performance *microcomputer-controlled automatic defrosting heat-pump air conditioners heat your entire room by recirculating air throughout the room, with the result that some time may be required after first starting the air conditioner until the room is heated...