Haier BD-103GAA Service Manual - Service Manual

SERVICE MANUAL

Model: BD-103GAA 

13

Issue  2009-12-17 

Rev.  

Ref0912S015V0

Chapter 5 Control and display system 

5-1. Control panel 

To prevent temperature being accidentally modified, the control is intentionally resistant to turning. To 

vary the setting, please use a coin or screwdriver.   

1. To switch on: Turn the control to the right adjust temperature to the level you require, between:   

Min(slight cooling) and max (Lowest temperature)   

If the appliance is equipped with indicator-lights, the following guide explains what is meant by each 

light up:   

-  Green = CONTROL 

      The appliance is under current and operating   

The green control light must always be on when the appliance is connected to the mains and switched 

on. It is very important to pay attention to this, because in the event of a power failure, the red and 

yellow lights stop operating and do no longer provide a warning.   

-  Red = ALARM 

  Interior temperature too high   

If the red indicator-light goes on, there may be several reasons for this, namely:   

■First start-up of appliance   

■Restart after defrosting   

■Filling freezer with fresh food     

In these cases it is normal that the red indicator-light goes on. It goes off automatically when the 

interior temperature reaches approximately –15°C.