Haier CommercialCool CPF10XCL-LW Service Manual - page 6
OPERATION
- 5 -
CONTROL PANEL
CONTROL PANEL
Battery replacement : Remove the cover on the back of the remote control and insert the batteries with the
( + ) and ( - ) poles pointing in the proper direction.
CAUTION
Use only AAA or IEC R03 1.5V batteries.
Remove the batteries if the remote control is not used for a month or longer.
Do not attempt to recharge the supplied batteries.
All batteries should be replaced at the same time, do not mix old battery .
Do not dispose of the batteries in a fire as they may explode.
!
!
Fan Speed Control
Fan Speed Control
Time / Temperature Set Control
Power Control
Power Control
On / Off
On / Off Timer Control
On / Off Timer Control
In running mode :
Auto switch off
In stand-by mode :
Auto switch on
Press " " or " " button
to adjust the time setting
for 1 hour interval.
:HIGH :MED :LOW
●
Used for adjusting the timer and
temperature.
●
The default display on control panel is
room temperature.
●
When " " or " " key is pressed in
cool mode, the set temperature is
displayed and may be adjusted. After
15 seconds the display will revert back
to room temperature.
Air Conditioner Remote Control
The functions work the same as your air conditioner's touch controls.
All key function can be accessed from the remote control.
●
Timer setting is available from 1-24 hours
by pressing the key " " on " ".
Notes
- Do not drop the remote control.
- Do not place the remote control in a
location exposed to direct sunlight.
- The remote control should be placed
about 1 meter or more away from TV,
or any electical appliances.
1.5V
1.5V
1.5
V
1.5
V
Mode Control
Mode Control
Press this button to change the
operation mode in the order of :
Cool Dehumidify
Fan