Haier ESA3056 User Manual - Caution:

Also when you shut off the air conditioner wait for 3 minutes

before turning it on again.

POWER  Turns air conditioner off.

SPEED "LOW" Low speed fan operation with cooling or not.

SPEED "HI" High speed fan operation with cooling or not.

This automatically controls the temperature of indoor air. Turn the knob

so that arrow points to the cooler marks for more moderate cooling.

Normal Fan

1. Turn the SPEED mode switch to the "HI" or the "LOW" setting.

2. Set the thermostat control to the temperature mark "FAN ONLY".

Normal cooling

1. Turn the SPEED mode switch to the "HI" or the "LOW" setting.

2. Set the thermostat control to the desire temperature (the mid-point

is a good starting position).

If the room temperature is not satisfactory after a reasonable time, adjust

the control to a warmer setting, as appropriate.

Maximum cooling

1. Turn the SPEED mode switch to the "HI" setting

2. Set the thermostat control to the MAX COOL temperature mark.

Quieter operation

1. Turn the SPEED mode switch to the "LOW" setting.

2. Set the thermostat control as needed.

CAUTION:

1

2

3