Haier GDZ3.5-1 User Manual - Installation Instructions
Other manuals for GDZ3.5-1:
User Manual
Manual is about: Exhaust Type Tumble Dryer
of
14
Installation Instructions
Assembly of dryer and bracket
First assemble the bracket (detailed installation method
please refers to the instruction of bracket assembly).
Adjust to the proper height according to the washer type
you purchased (six height levels are available)
(Note: the bracket shall not be touched when the top cover
of washer is open to avoid inconvenient clothes loading
and unloading )
Carefully place your dryer onto the bracket with the control
panel in the bottom (as shown in the right figure).
Align assemble holes on the bracket with the installation
holes, screw and fasten them by the fixing screws and
washers attached.
After assembled, make sure that the distance between the
exhaust vent of the dryer and wall is more than 10-15cm.