- DL manuals
- Haier
- Dishwasher
- HDW9SST
- Instructions For Use Manual
Haier HDW9SST Instructions For Use Manual
Summary of HDW9SST
Page 1
Dishwasher hdw9sst hdw9wht instructions for use 012050
Page 2: Index
Index 1 s afety is very important close-up view (control panel) close-up view (interior) detergent and rinse aid loading the dishwasher turning on the appliance energy saving tips how to keep your dishwasher in shape wash cycle table cleaning and special maintenance troubleshooting installation tech...
Page 3: Safety Is Very Important
Safety is very important carefully remove and dispose of the packing material. Check to make sure that the appliance is not damaged. If in doubt, contact the retailer it was purchased from. This dishwasher is designed for washing household dishes and cooking utensils. Do not install this appliance o...
Page 4: Close-Up View (Interior)
C lose-up view (control panel) a b c "end" light "power" button knob for selecting cycle handle for opening door d e close-up view (interior) a b c d upper rack rack height adjustor top spray arm lower rack e f g washing filter bottom spray arm detergent and rinse aid dispenser 3 heat indicator ligh...
Page 5: Detergent And Rinse Aid...
Detergent and rinse aid... Detergent detergent specifically intended for use with dishwashers must be used. The dispenser must be refilled be- fore the start of each wash cycle following the instructions provided in the "wash cycle table." the deter- gent dispenser is located on the inside panel the...
Page 6: Loading The Dishwasher
Loading the dishwasher before placing the dishes in the dishwasher, remove the larger food particles to prevent the filter from becoming clogged. If the pots and pans have baked-on food that is extremely hard to remove, we recommend they are soaked before washing. This will eliminate the need for ex...
Page 7: Urning On The Appliance
Notice: w hen washing, the knob will not rotate itself. T urning on the appliance starting a wash cycle... M ake sure that the plug for the appliance is inserted into the wall socket. Make sure that the water supply is turned on to full pressure. Load the dishes. Pour in the detergent. Press the "po...
Page 8: Energy Saving Tips
It is important to try and run the dishwasher when it is fully loaded to save on energy. Rather than run a full cycle for a half load, you can run the "pre-rinse" cycle which will prevent odours from forming and food from caking onto the dishes. Choose the right wash cycle: the choice of cycle depen...
Page 9: Wash Cycle Table
Wash cycle table ( ) as/nzs 2007 test with rinse aid setting 5 w ash programme description of cycle pre-wash with hot water. Extended wash at 70°c. Rinses with cold water. Rinse with hot water. Drying. Pre-wash use cold water. Extended wash at 50°c. Rinse with cold water. Rinse with hot water. Dryin...
Page 10: Troubleshooting
Cleaning and special maintenance filter assembly for the best performance and results, the filter assembly must be keep clean. The filter removes food particles from the wash water, allowing the water to be recirculated during the cycle. For this reason, it is a good idea to remove any food particle...
Page 11: Troubleshooting
Troubleshooting if you take all these checks and the dishwasher still does not function or your dishwasher have any other error display, you can power the dishwasher off, and wait a few minutes. You can power the dishwasher on, try it again, if the dishwasher still does not function and/ or the prob...
Page 12: Roubleshooting
T he nature of the problem. The model type number (mod...) and the serial number (s/n...), which are indicated on the plate located on the side of the inner part of the door. L ower spray arm rotates with difficulty s pray arm is blocked by small items or food remains. T roubleshooting lid in deterg...
Page 13: Troubleshooting
Troubleshooting ...With the dishes,cutlery, etc. Remnants of food are stuck to the dishes, cutlery,etc. D ishwasher was not loaded properly. Jets of water could not reach all parts of the dishes, etc. Too many items in the rack. Items in the rack were touching each other. Not enough detergent was ad...
Page 14: Installation
Installation positioning the appliance position the appliance in the desired location. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or left to allow correct installation. Levelling the appliance once the appliance is positioned, adjust the feet by ...
Page 15: Installation
Attention: the plastic hose support must be fastened to the wall to prevent the drain hose from moving. Electrical connection after making sure that the voltage and frequency in the home correspond to those on the rating plate of the appliance (located on the side of the stainless steel inner door) ...
Page 16: Technical Dat
Technical dat a diagram w idth 45 cm depth 60 cm height 85 cm capacity 9 standard place settings mains water pressure 0.03-1.0 mpa power voltage 220-240v~ 50hz 1900w total absorber power 15 program switch relay heating indicator water lever switch thermal cut-out heater s1 end indicator door switch ...