Haier HDY-D60 Owner's Manual

Other manuals for HDY-D60: Parts Manual
Manual is about: Haier Dryer Owner's Manual

Summary of HDY-D60

  • Page 3

    15 do not dry unwashed items in the tumble dryer. 16 fabric softeners, or similar products, should be used as specified by the fabric softener instructions. 17 to prevent fire, do not use heat to dry items containing plastic, foam rubber or similarly textured rubber-like materials, or items containi...

  • Page 6

    1. Power up insert the power plug into an appropriate power outlet that is properly installed and grounded. Operating power supply: 220-240v~50hz. 2. Laundry loading open the door and load the laundry into the drum of the dryer. For a more energy efficient and better drying result, make sure the loa...

  • Page 8

    Warning! Unplug the power cord prior to any cleaning cleaning the surface wipe off any dust or dirt. Note: do not use excessive water,. A damp cloth is fine. Do not use solvent. Do not use spray cleaners when cleaning the interior. Do not use harsh or abrasive cleaners. Cleaning the filter screen to...

  • Page 9: Installation Instructions

    Remove the transport packaging (fig.1) remove the tape on the door (fig.2), the wall mounting kit and the inverted panel film attached to the inside of the drum (fig.3) before starting the dryer. Packing accessories check list of the accessories and materials provided with the machine: to ensure the...

  • Page 12: Installation Instructions

    Installation instructions 5. With assistance, mount dryer on wall brackets. See fig.4. 6. A second control panel with inverted symbols is supplied. Peel the release paper from the back of inverted film then place new control panel film on the surface so that the writing is the correct way around. 11...

  • Page 13: Installation Instructions

    Installation instructions 2. Install the dryer with stacking kit on the top of the front load washing machine (fig.3). Drill two holes on both sides of washer with 2.9mm diameter drill. Detailed drill postion as shown on the stacking kit. Make sure the included screws are used. Fix the stacking kit ...

  • Page 14: Installation Instructions

    Installation instructions 13 rear venting if you want to choose the rear venting mode, the exhaust grill at the front of the dryer needs to be replaced with the outlet cover from the back panel of the dryer. Gently open the grill, using a thin tool such as a key. Next, remove the cover from the back...

  • Page 16

    Power supply maximum operating current (a) rated load (kg) drying program maximum power (w) dimensions (hxdxw) mm weight (kg) ( 220-240)v~ · 50hz 10 6 7 2100 830x560x600 30 ipx4 waterproof degree item type hdy-d60 15.