Haier HDY-D70 User manual - Safety Instructions
4
Electrical connection (uK ONlY)
For your safety please read the following information
Warning: This appliance must be earthed.
The appliance must be connected to a 220 volt 240 cycle AC supply by
means of a three pin socket, suitably earthed and should be protected by a
13 amp fuse.
The appliance is supplied with a standard 3 pin mains plug fitted with a 13
amp fuse. Should the fuse require replacement, it must be replaced with a
13 amp fuse approved to BS1362.
The plug contains a removable fuse cover that must be refitted when the
fuse is replaced. In the event of the fuse cover being lost or damaged, the
plug must not be used until a replacement cover has been obtained.
When disposing of the appliance the plug should be cut off as close to
the plug body as possible and the fuse should be removed to prevent an
electrical hazard. Dispose of the plug safely.
The use of adapters, multiple connectors and/or extension cables is not
recommended.
how to wire a 13 amp plug.
Important
The wires in the mains lead on this
appliance are coloured in accordance with
the following code:
Green and Yellow – Earth
Blue - Neutral
Brown - Live
As this may not correspond with your installation, proceed as follows:
The green and yellow wire must be connected to the terminal in the plug
which is marked with the letter E or with the earth symbol ~ or coloured
green and yellow,
The blue wire must be connected to the terminal marked N.
The brown wire must be connected to the terminal marked L.