Haier HG-M161 User Manual
2
3
5
6
7
4
1
Phone Overview
(Picture for reference only)
Safety Instructions
These instructions are intended for safe and effective use of your phone. Please
follow these guidelines. Failure to do so might cause the product to malfunction or
even become a potential hazard to your health.
Do not use your mobile phone while driving. Park the car before making a call.
Turn off your phone when refueling.
Do not use your phone near a gas station, flammable, or chemical substances.
Warning! It may explode when exposed to fire.
Do not use your phone during a flight, it is dangerous.
Do not use your phone near medical equipments like pacemaker and hearing aids
without requesting permission from the physician or medical staff.
Radio signals may affect the performance of the phone.
Do not touch any exposed parts of the antenna during a call; otherwise it will
affect the call reception and waste battery power.
Do not attempt to disassemble or modify the phone by yourself. Only authorized
personnel should perform this service.
When you connect accessories to your phone, please read the safety guidelines
carefully.
Do not use unauthorized products or accessories with phone.
Please use only the original accessories or products that are authorized by our
company.
Keep out of children's reach.
operator.
If you enter the wrong PIN three times in a row, it will be locked. You need to enter
your PUK (Personal Unblocking Key) number to unlock. Please contact your network
operator for more details.
PIN2 is provided to some SIM. If you enter the wrong PIN for another three times in a
row, it will be locked. You need to enter your PUK2 to unlock. This PUK2 may be
different from previous PUK. Thus, please contact your network operator for more
information.
PUK (Personal Unblocking Key) is used to unblock the PIN. PUK is provided to a SIM
card. If you lose or forget the password, contact your network operator.
Protects your phone against unauthorized usage. You can turn on the Phone code for
your personal security use.The original code is "0000".
Turn on the phone
1.Press and hold
(End key) to turn on the phone. The LCD screen will turn on.
2.If SIM card is not properly installed, a warning prompt will appear on the screen.
Press and hold
(End key) to turn off, and re-install the SIM card properly.
3.If you have set a phone password, you will be asked to enter your Password.
4.If your SIM card is protected by PIN, the phone will instruct you to enter the PIN
PIN2
PUK
Phone code
General Features
number.
5.You will be asked to enter the PUK number if SIM card is locked.
6.The phone will search for network automatically once turned on.
If the phone has found an authorized network operator, the name of the network and
signal intensity will be displayed.
If not, you can only use the emergency calls and other non-communication service.
In standby mode, enter a phone number (with region code and area code), Press
(Right Soft Key) to delete a wrong entry. Then press
(Dial Key) to dial the number.
When the call gets connected, the call status will be displayed.
When you have incoming call, press
(End Key) to reject it.
When a call comes in, phone will ring and/or vibrate. It will show the caller's name if
the network supports it. The caller's name display depends on whether you have
saved it in your phonebook or not. Press
(Dial Key) to answer, or press Option ->
Accept.
When you have finished talking, press
(End Key) to end a call
Also, you can press
(End Key) if you want to terminate a call after dialing a number.
Warning!
To make Domestic calls
To reject a call
To answer a call
To end a call conversation
Emergency calls
Getting Started
Inserting SIM card and Battery
WARNING!
Keep SIM Card out of children's reach.
Any abrasions or bend might easily cause damage. Please take extra care.
Make sure the phone is power off when you remove the SIM Card.
Remove the battery cover by sliding it downward.
Remove the battery cover. Insert your fingernail at the bottom slot of the battery
compartment and then pull out the battery.
Insert the SIM Card into the SIM card slot as per figure on slot.
Place the battery into the phone. Make sure that the charge pins are in contact with
the battery terminals.
Slide the battery cover until it locks into place.
Insert the connector of the charger into the top-left side of the phone (Note: Ensure
that the charger connector is plugged in).
Plug the charger into the AC wall outlet.
When the power turns on, “Charging…” will be displayed on the LCD screen, and
the battery indicator will start scrolling. It will only stop when the battery is fully
charged. If a battery is completely discharged, it may take a few minutes before the
charge indicator appears on the LCD screen.
Taking out the battery
Charging the Battery
You do not need to own a SIM card to make emergency calls.
Emergency calls may differ for different network operators, please contact your
network operator to get your local emergency call numbers.
To make an international call, press and hold
0
key until a + sign appears.
Then enter the country/region code, area code (without the first zero), and the phone
number:
After you have entered the + sign, enter the country code and the number you want to
dial. For example, +91 for India.
As you dial a common international code, you don't have to enter 0 of the city code.
Find the number you want to call in your phone book, press
(Dial Key) to
automatically dial the displayed contact.
All the numbers that you have dialed are saved in the call records. When the calls
memory is full, the old numbers are automatically deleted. To scroll the call list:
In standby mode, press
(Dial Key). The call records will display starting from the
most recently called number. Press
(Dial Key) key to automatically dial the
displayed record. Or Press Up or Down key to scroll the list and then press
(Dial
Key) key to automatically dial the selected record.
While the phone is ringing, press
(Left Soft Key) to enter the calling options or
To make an international call
To dial from contacts
To dial from the Call list
Incoming Call Options
After charging is completed, disconnect charger from phone and the socket of the
alternating current.
When charging, please place the phone in an environment that has a normal room
temperature and good ventilation. It is recommended to charge the phone in an
environment with a temperature that ranges from 5
~40
. Please ensure to use
only the charger offered by the manufacturer. Using unauthorized charger may cause
danger and violate the authorization of the phone and the guarantee.
When the phone automatically turns off or indicates the alarm information of power
shortage, please charge the battery on time.
The duration time of the standby and conversation of the phone offered by
manufacturer is based on ideal working environment. It may vary according to the
network condition, working environment, and application methods.
Do not take the battery out when it is being charged.
To ensure best performance, please use original accessories.
Using any unauthorized accessories may affect your mobile phone's performance.
PIN
Notice:
Warnings!
Security number
Personal data and settings in your phone and SIM card may be lost when you take
out the battery.
PIN (Personal Identity Number), usually provided to a SIM Card by the network
HG-M161
USER MANUAL
USER MANUAL
Left Soft key
Answer/Dial key
Right Soft key
End/Power key
Navigation key
Dial and answer calls. In
standby mode, press to
view recently dialed calls.
Activates/selects the Radio menu
function at the right bottom side
of the LCD screen.
Ends or reject calls; Power on/Power
off; In the menu programming,
press to return to standby mode.
In standby mode, press;
Left Create message
Right Inbox
Down Contact list.
Long press up torch on/off
Activates/selects the menu
function at the left bottom
side of the LCD screen.