Haier HLC22XSLW2 Owner's Manual - page 14
Operation
EN-13
Haier LED HDTV/DVD
Channel Skip
2 Analog
3 Analog
4 Analog
5 Analog
5-1 Digital
6 Analog
7 Analog
8 Analog
9 Analog
10 Analog
Select
Back
EXIT
Set
Video
Audio
Channel
Lock
Function
ENTER
/
Channel Labels
Y
: Allows you to name the channel
that is selected. Press
/
ENTER
button to enter
the submenu.
Channel Label Set
Channel Index
Channel Label
Select
Back
EXIT
Video
Audio
Channel
Lock
Function
1
/
Then press
/
button to
select Channel Index
and
/
button to select the position of the item that
you want to change, afterward press INPUT to input the
numbers and symbols and ENTER button to confirm.
Time Shifting Mode
Y
:
To turn the Time Shifting
Mode on or off.
Set the
A
Time Shifting On, then insert the USB drive in
the USB input.
Press
B
PLAY/PAUSE to play or pause the program. If
you want to stop time shift function, press the STOP
button.
You can stop the time shift program being played
by pressing the STOP button.
-00:00:01
1
x
7:00
7:30
-00:00:01
7:00
7:30
1.Time shift time. The time delay to the current program
time.
2.Playback status: It shows the playback status (Play,
/
button to go up and down to select the
desired option.
Press
C
/ ENTER button to confirm and
/
button increase and decrease the level to
adjust the selected option to your preference.
Repeat step 2 and step 3 until desired audio quality
D
has been achieved.
Function
Tuner Mode
Y
:Press
/
ENTER
button to select
Antenna or Cable.
Channel Scan
Y
: Press
/
ENTER
button to start to
scan, press EXIT to cancel.
Channel Scan
Status: Scanning...
Antenna
Analog Channels: 4
Digital Channels: 3
Cancel
EXIT
40%
Video
Audio
Channel
Lock
Function
All channels now available will be automatically
preset in order .After the search has finished, the
first program number will display on the screen. This
search automatically adds only the active channels in
your area to the TV's memory. It deletes any channels
on which there is no broadcast or a poor signal. The
channels found are automatically saved.
Channel Skip
Y
:Press
/
ENTER
button to enter
the submenu, then press
/
button to
select
the channel number (eg.2) and press ENTER to
confirm, a mark will be display in the pane as
follows and this channel will be skipped next
time you press
/
button but you can press
digits button to select the channel
. If you want to
resume the channel, press ENTER button again.