Summary of HSU-18H13
Page 1
Please read this operation manual before using the air conditioner..
Page 2
Before disposing an old air conditioner that goes out of use, please make sure it's inoperative and safe. Unplug the air conditioner in order to avoid the risk of child entrapment. It must be noticed that air conditioner system contains refrigerants, which require speciali- zed waste disposal. The v...
Page 3
For the purpose of the safety,the air con- ditioner must be properly grounded in acco- rdance with specifications. Always remember to unplug the air conditioner before openning inlet grill. Never unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pull straight out ...
Page 4
1.Applicable ambient temperature range: the machine is adaptive in following situation 3 caution 3. If the fuse on pc board is broken please change it with the type of t. 3.15a/250v. 4. The distance between the indoor unit and the floor should be more than 2m. 5. The wiring method should be in line ...
Page 5
Parts and functions 4 remote signal receiver operation mode indicator timer mode indicator power indicator vertical flap air filter inlet grille emergency switch(manual) test running switch(manual) use remote controller to adjust up and down air flow. (don't adjust it manually.) lights up when unit ...
Page 6
5 parts and functions fan dry heat cool auto auto lo med hi operation 1. Mode display 2. Swing display 3. Fan speed display 4. Sleep display 5. Lock display 6. Signal sending 7. Timer offdisplay 8. Timer on display 9. Clock display 10. Temp display 11. Power on/off used for unit start and stop. 12. ...
Page 7
6 *********7# **,******,* *********** ********,* *****,6**** ****** ******** ******** *********7# **,******,* *********** ********,* *****,6**** ****** ******** ******** *********7# **,******,* *********** ********,* *****,6**** ****** ******** ******** remote controller's operation when in use, put...
Page 8
7 (4) unit stop (1) unit start auto run, fan operation enjoy yourself by just a gentle press. Mode changes as follows: press on/off button, unit starts. Previous operation status appears on display. (not timer setting) power indicator on indoor unit lights up. (2) select operation mode press mode bu...
Page 9
8 press mode button. For each press, operation recommendations: operation cool,heat and dry operation use cool in summer. Use heat in winter use dry in spring, autumn and in damp climate. (1) unit start mode changes as follows: press on/off button, unit starts. Previous operation status appears on d...
Page 10
9 operation (5) air flow direction adjustment after operation mode is selected, vertical flap will open automatically according to the mode. Referring to the fig. Cool heat cool about 10 o about 10 o about 45 o about 60 o better set a temp. Difference of 3-5 o c between indoor and outdoor temp. In c...
Page 11
1 0 on/off temp set timer clock swing sleep lock reset fan mode operation timer operation you can let unit start or stop automatically at following times: before you wake up in the morning, or get back from outside or after you fall asleep at night. Set clock correctly before starting timer operatio...
Page 12
11 timer on-off on/off temp set timer clock swing sleep lock reset fan mode operation timer on-off to cancel timer mode power indicator on indoor unit lights up. (1)after unit start, select your desired operation mode operation mode will be displayed on lcd. On off off timer on timer off timer on-of...
Page 13
1 2 emergency operation: pi...Pi pi emergency operation and test operation operation carry out this operation only when the remote controller is defective or lost. When the emergency operation switch is pressed, a" pi "sound starts once, which means the start of this operation. In this operation, it...
Page 14
1 3 on/off temp set timer clock swing sleep lock reset fan mode comfortable sleep operation in cool mode sleep in selected mode. Before going to bed at night, you can simply press the sleep button and unit will bring you a sound one hour after sleep mode starts, temp. Will become 1 o c higher than t...
Page 15
1 4 maintenance different models have different appearance cleaning of unit casing cleaning of remote controller cleaning of air filter cut off power supply before cleaning unit casing with soft cloth. In case of heavy stain, clean it with neutral detergent. Squeeze water in the cloth, wipe off the ...
Page 16
1 5 maintenance better use of air conditioner proper room temperature. Cleaning of the air filter. Effective use of the timer. Closing of doors and windows during operation never fail to observe the followings do not sprinkle water over the unit. Do not block the inlet or outlet. Do not pull power p...
Page 17
1 6 trouble shooting before asking for service, check the following first. Normal performance inspection noise is heard phenomenon cause or check points the system does not restart immediately. Smells are generated. Mist or steam are blown out. Multiple check does not work at all. Poor cooling appli...